JVC MX-K5 manual Connecting Speakers, To connect an outdoor AM antenna

English

AM antenna

1		2
		Vinyl-covered wire
ANTENNA		(not supplied)
FM [75	]	AM
	AM loop antenna
	(supplied)

1Press and hold the clamp of the AM terminal on the rear of the unit.

2Insert the end of the AM loop antenna cord into the terminal.

3Release the finger from the clamp.

4Turn the AM loop antenna until you have the best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM terminal and extend it horizontally. (The AM loop antenna must remain connected.)

For better reception of both FM and AM

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

Connecting Speakers

1		2
	Red
	SPEAKER
	[6-16	]
Speaker			Speaker
cord	R	L	cord
(red/black)			(red/black)
	Black
from right			from left
speaker’s			speaker’s
terminals			terminals

1Press and hold the clamp of the speaker terminal on the rear of the unit.

2Insert the end of the speaker cord into the

terminal.

Match the polarity (colors); Red (+) to red (+) and black

(–) to black (–).

3Release the finger from the clamp.

IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

– 7 –