Connecting Other Equipment | JVC MX-WMD90 instruction

Continued

Connecting Other Equipment

You can connect the following equipment to this unit:

•Cassette deck — used as a playback and recording device. By using the cassette deck, you can record any source played back on this unit.

•Audio equipment — used only as an analog playback device.

•Audio equipment with an optical digital output terminal

— used only as a digital playback device.

When you connect and use these equipment, refer also to the manuals supplied with them.

Be sure that the plugs of the audio cords and the jacks on the rear of the unit are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

• DO NOT connect other equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect a cassette deck

ANTENNA

To input

Cassette deck

To output

To connect audio equipment without a digital output terminal

ANTENNA

To output

Audio equipment

without a digital output

Connect the audio output jacks on the other equipment and the AUX jacks, using an audio cord (not supplied).

English

By using audio cords (not supplied), connect:

•Between the audio input jacks on the cassette deck and the TAPE OUT (REC) jacks — For recording on the cassette deck.

•Between the audio output jacks on the cassette deck and the TAPE IN (PLAY) jacks — For playing a tape.

–8 –

Image 11

JVC MX-WMD90 manual Connecting Other Equipment, To connect a cassette deck

Contents

MX-WMD90 Mises en garde, précautions et indications diverses Face For Canada/pour le Canada Introduction Precautions Contents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsFront Panel Display Window MD deck B section Front PanelAmplifier/tuner section MD deck a section Remote Control Remote Control Unpacking Putting the Batteries into the Remote ControlConnecting Antennas Getting Started To connect an outdoor AM antenna Connecting SpeakersYou can connect the speakers using the speaker cords AM antenna To connect a cassette deck Connecting Other Equipment Press Demo Output terminalTo start the display demonstration manually Equipment Finally Basic and Common Operations Front panel Remote control To adjust the clock again Setting the ClockTurning On the Power and Selecting the Sources Adjusting the Volume Activating the Surround Effect Creating Your Own Sound Mode Manual ModeTo use your own sound mode Reinforcing the Bass Sound Listening to FM and AM Broadcasts To change the FM reception mode Tuning in a StationPresetting Stations Tuning in a Preset Station Playing Back CDs To exchange CDs during playback of another Loading CDsPlaying Back the Entire Discs Continuous Play Basic CD Operations To go to another track To go to another track directly using the number buttonsTo check the program contents Programming the Playing Order of the Tracks Program Play Tracks of all loaded CDs will play at random Playing at Random Random PlayRepeating Tracks or CDs Repeat Play Prohibiting Disc Ejection Disc Lock Playing Back MDs Playing Back the Entire MD Continuous Play When using MD deck aWhen using MD deck B Loading MDs While playing an MD, you can do the following operations Basic MD OperationsTo change the display Indications Insert an MD Programming the Playing OrderTracks Program Play Insert MDs Press #/ 8 on MD deck B or MD B 6 on the remote control Tracks of the loaded MDs will play at random Repeating Tracks Repeat PlayTo prohibit disc ejection Disc Lock FM/AM Tape AUX Recording on MDs Recording is only possible on MD deck B Before You Start RecordingAbout the track marks To avoid erasing important recordings Press AUX again When recording from the cassette deck, start playing a tapeRecording the External AUX Equipment AUX Recording To check the remaining time Start playing the source on the external equipment Various Recording FunctionsSynchronized Recording MD to MD Synchronized Recording On the unit only Load a CD To confirm the recording contentsCD to MD Synchronized Recording Press Start Enter Rotate the left jog dial to select the recordable MD Single Track RecordingFirst Track Recording On the unit only Load CDs To stop any time during editing process and start Listening Edit RecordingOn the unit only Prepare a CD or an MD as the source sound Repeat to program other tracks Triple Recording Prepare the source you want to record from Long Recording Editing MDs Introducing MD Editing Functions To join the divided tracks again, see the Join function Divide FunctionPress MD Edit Rotate the right jog dial until Move ? appears Press SET Join FunctionMove Function To divide the joined tracks, see the Divide function MD deck B starts playing the MD CANCEL, then select the correct track number againErase Function Edit ALL Erase Function Assigning Titles to MDs Assigning a Title Using the Unit Make sure that the character you want to change is flashing Changing the TitlePress Enter Start to finish the current title entry You can make a correction or change the title Press Enter to finish the current title entry Track title entry indication mode appears whenPress MD Title Input Press the button for the next character you want to input You can assign titles during play or recording PO WER Using the Timers To turn on the Recording Timer, press SET Using Recording TimerHow Recording Timer actually works To turn on or off Recording Timer after its setting is done Unit is turned off Using Daily TimerHow Daily Timer actually works Volume level will be set the previous level when How Sleep Timer actually works Timer PriorityUsing Sleep Timer Handling CDs MaintenanceTo clean the CD General Notes Atrac Adaptive TRansform Acoustic Coding Utoc User Table Of ContentsAdditional Information MD Disc Types MD limitations Sound Skip Guard Memory Symptom Possible Cause Action Troubleshooting MD Messages Signification Solution Specifications EN, FR JVC 0199KSMMDWJEM