MD Messages, Signification Solution | JVC MX-WMD90 instruction

English

?

?

?

MD Messages

Message

BLANK DISC

Signification		Solution
The disc is blank.		Change the MD with another if you
		want to enjoy playback.

CANNOT JOIN

DISC ERROR

DISC FULL

EMERGENCY STOP

You are trying to join tracks which cannot be joined.

There is a problem with this MD.

There is no more space on the MD or there are over 254 tracks.

A malfunction has occurred during recording.

This is not a malfunction. (See MD limitations on page 51.)

Change the MD.

Use another recordable MD or erase some tracks.

Eject the MD and re-insert it.

MD NO DISC

NON-AUDIO

CANNOT COPY

There is no MD.		Put an MD.
You are trying to copy a non-audio disc		Stop recording.
like a CD-ROM or a Video CD.

PLAY BACK

DISC PROTECTED

SCMS CANNOT

COPY

OCCUPIED

LOAD ERROR

DIGITAL IN

UNLOCK

You are trying to edit or record on a playback-only MD.

The MD is write-protected.

Digital copy of the 2nd generation is prohibited.

During playback, you have inserted an MD into MD deck B loading slot where another MD had been inserted.

MD is not inserted correctly.

There is no digital device connected to the AUX DIGITAL IN OPTICAL terminal.

Use a recordable MD.

Unprotect the MD or use another. (See page 26.)

Use an analog recording method.

Remove the MD.

Insert the MD correctly.

Connect a digital device using digital optical cord.

– 53 –

Image 56

JVC MX-WMD90 manual MD Messages, Signification Solution

Contents

MX-WMD90 Mises en garde, précautions et indications diverses For Canada/pour le Canada Face Precautions Introduction Contents Location of the Buttons and Controls Front PanelDisplay Window Become familiar with the buttons and controls on your unit Front Panel Amplifier/tuner sectionMD deck a section MD deck B section Remote Control Remote Control Putting the Batteries into the Remote Control Connecting AntennasGetting Started Unpacking Connecting Speakers You can connect the speakers using the speaker cordsAM antenna To connect an outdoor AM antenna Connecting Other Equipment To connect a cassette deck Output terminal To start the display demonstration manuallyEquipment Finally Press Demo Front panel Remote control Basic and Common Operations Setting the Clock Turning On the Power and Selecting the SourcesAdjusting the Volume To adjust the clock again Creating Your Own Sound Mode Manual Mode To use your own sound modeReinforcing the Bass Sound Activating the Surround Effect Listening to FM and AM Broadcasts Tuning in a Station Presetting StationsTuning in a Preset Station To change the FM reception mode Playing Back CDs Loading CDs Playing Back the Entire Discs Continuous PlayBasic CD Operations To exchange CDs during playback of another To go to another track directly using the number buttons To check the program contentsProgramming the Playing Order of the Tracks Program Play To go to another track Playing at Random Random Play Repeating Tracks or CDs Repeat PlayProhibiting Disc Ejection Disc Lock Tracks of all loaded CDs will play at random Playing Back MDs When using MD deck a When using MD deck BLoading MDs Playing Back the Entire MD Continuous Play While playing an MD, you can do the following operations Basic MD OperationsTo change the display Indications Insert an MD Programming the Playing OrderTracks Program Play Press #/ 8 on MD deck B or MD B 6 on the remote control Insert MDs Tracks of the loaded MDs will play at random Repeating Tracks Repeat PlayTo prohibit disc ejection Disc Lock Recording on MDs FM/AM Tape AUX Before You Start Recording About the track marksTo avoid erasing important recordings Recording is only possible on MD deck B When recording from the cassette deck, start playing a tape Recording the External AUX Equipment AUX RecordingTo check the remaining time Press AUX again Various Recording Functions Synchronized RecordingMD to MD Synchronized Recording Start playing the source on the external equipment To confirm the recording contents CD to MD Synchronized RecordingPress Start Enter On the unit only Load a CD Single Track Recording First Track RecordingOn the unit only Load CDs Rotate the left jog dial to select the recordable MD Listening Edit Recording On the unit only Prepare a CD or an MD as the source soundRepeat to program other tracks To stop any time during editing process and start Triple Recording Long Recording Prepare the source you want to record from Editing MDs Introducing MD Editing Functions To join the divided tracks again, see the Join function Divide FunctionPress MD Edit Join Function Move FunctionTo divide the joined tracks, see the Divide function Rotate the right jog dial until Move ? appears Press SET CANCEL, then select the correct track number again Erase FunctionEdit MD deck B starts playing the MD ALL Erase Function Assigning Titles to MDs Assigning a Title Using the Unit Changing the Title Press Enter Start to finish the current title entryYou can make a correction or change the title Make sure that the character you want to change is flashing Track title entry indication mode appears when Press MD Title InputPress the button for the next character you want to input Press Enter to finish the current title entry You can assign titles during play or recording Using the Timers PO WER Using Recording Timer How Recording Timer actually worksTo turn on or off Recording Timer after its setting is done To turn on the Recording Timer, press SET Using Daily Timer How Daily Timer actually worksVolume level will be set the previous level when Unit is turned off How Sleep Timer actually works Timer PriorityUsing Sleep Timer Maintenance To clean the CDGeneral Notes Handling CDs Utoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic Coding Sound Skip Guard Memory MD limitations Troubleshooting Symptom Possible Cause Action Signification Solution MD Messages Specifications EN, FR JVC 0199KSMMDWJEM