English
You can assign a name to each MD and to each track. Once a title is assigned, it is displayed for confirmation. Each title can be composed of up to 64 characters, and can be input using alphabetic characters (uppercase and lowercase), symbols and numerals.
Assigning a Title Using the Unit
In the following example, the process is explained from the very first — that is, inserting a disc. If you already start recording or playing, start from step 3.
• To stop any time during the process, press TITLE.
1 Insert an MD you want to edit into the MD B loading slot.
2 Press one of the MD number buttons (MD 1, MD 2, and MD 3) corresponding to the MD you want to assign titles.
MD deck B starts playing the MD.
•If you do not have to listen to the MD while assigning titles, press 7 for MD deck B to stop playing.
3 Press TITLE.
MD deck B enters title entry mode.
•Track title entry indication (mode): appears when you press TITLE while playing or recording.
•Disc title entry indication (mode): appears when you press TITLE when MD deck B stops.
4 Rotate the right jog dial to change the title entry mode.
• Title entry mode changes as follows:
Disc |
|
| 1st track |
|
|
| 2nd track | |
title |
| title |
|
|
| title | ||
Last track |
|
|
|
|
|
| 3rd track | |
title |
|
|
|
|
|
| title | |
5 Press SET to enter the selected title entry mode.
Current character | Currently selected character | |
entry position | ||
|
Character entry Character set section section
6 Press DISPLAY/CHARA to select the character set you want.
•Each time you press the button, the character sets change as follows:
Capital letters |
| Small letters | |
& Symbols * |
| & Symbols * |
|
Numerals
* See page 42 for available symbols.
7 Input a character.
• EX. When entering “H”
1)Rotate the right jog dial until “H” is selected.
2)Press SET.
The selected character is entered, and the character entry position moves to the next.
•To move the character entry position while entering a title, rotate the left jog dial.
•If you have entered an incorrect character, press CANCEL to cancel the last entry.
•To enter a blank, rotate the left jog dial to the right without entering any character (or select a blank by rotating the right jog dial, then press SET).
8 Repeat steps 6 and 7 to enter other characters.
•The main display can only show 4 characters at a time. If you enter the 5th character, the first character disappears, and so on.
– 41 –
