Maintenance, General Notes, Handling CDs | JVC MX-WMD90 specification

English

Maintenance

To get the best performance of the unit, keep your discs and mechanism clean.

General Notes

In general, you will have the best performance by keeping your CDs, MDs and the mechanism clean.

•Store CDs and MDs in their cases, and keep them in cabinets or on shelves.

•Keep the CD trays, and the MD loading slot cover closed when not in use.

Handling CDs

• Remove the CD from its case by holding it at the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the CD.

• Put the CD back in its case after use to prevent warping.

• Be careful not to scratch the surface of the CD when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the CD

Wipe the CD with a soft cloth in a straight line from center to edge.

Handling MDs

• Do not open the shutter.

- The shutter is locked so that it will not open. Trying to force it open will break the MD. If the shutter opens accidentally, close it again quickly without touching the MD inside.

•Do not place MDs in the follow- ing places:

- High temperature areas such as in direct sunlight or inside a car.

-High humidity areas, e.g. in a bathroom.

-On a beach or sandy area.

•Clean MDs regularly.

-If dust or dirt gets on cartridge, wipe it off with a soft dry cloth.

DO NOT use any solvent — such as conventional record cleaner, spray, thinner, or benzine — to clean the CD.

– 49 –

Image 52

JVC MX-WMD90 manual Maintenance, General Notes, Handling CDs, Handling MDs, To clean the CD

Contents

MX-WMD90 Mises en garde, précautions et indications diverses For Canada/pour le Canada Face Precautions Introduction Contents Location of the Buttons and Controls Front PanelDisplay Window Become familiar with the buttons and controls on your unit Front Panel Amplifier/tuner sectionMD deck a section MD deck B section Remote Control Remote Control Putting the Batteries into the Remote Control Connecting AntennasGetting Started Unpacking Connecting Speakers You can connect the speakers using the speaker cordsAM antenna To connect an outdoor AM antenna Connecting Other Equipment To connect a cassette deck Output terminal To start the display demonstration manuallyEquipment Finally Press Demo Front panel Remote control Basic and Common Operations Setting the Clock Turning On the Power and Selecting the SourcesAdjusting the Volume To adjust the clock again Creating Your Own Sound Mode Manual Mode To use your own sound modeReinforcing the Bass Sound Activating the Surround Effect Listening to FM and AM Broadcasts Tuning in a Station Presetting StationsTuning in a Preset Station To change the FM reception mode Playing Back CDs Loading CDs Playing Back the Entire Discs Continuous PlayBasic CD Operations To exchange CDs during playback of another To go to another track directly using the number buttons To check the program contentsProgramming the Playing Order of the Tracks Program Play To go to another track Playing at Random Random Play Repeating Tracks or CDs Repeat PlayProhibiting Disc Ejection Disc Lock Tracks of all loaded CDs will play at random Playing Back MDs When using MD deck a When using MD deck BLoading MDs Playing Back the Entire MD Continuous Play To change the display Indications Basic MD OperationsWhile playing an MD, you can do the following operations Tracks Program Play Programming the Playing OrderInsert an MD Press #/ 8 on MD deck B or MD B 6 on the remote control Insert MDs To prohibit disc ejection Disc Lock Repeating Tracks Repeat PlayTracks of the loaded MDs will play at random Recording on MDs FM/AM Tape AUX Before You Start Recording About the track marksTo avoid erasing important recordings Recording is only possible on MD deck B When recording from the cassette deck, start playing a tape Recording the External AUX Equipment AUX RecordingTo check the remaining time Press AUX again Various Recording Functions Synchronized RecordingMD to MD Synchronized Recording Start playing the source on the external equipment To confirm the recording contents CD to MD Synchronized RecordingPress Start Enter On the unit only Load a CD Single Track Recording First Track RecordingOn the unit only Load CDs Rotate the left jog dial to select the recordable MD Listening Edit Recording On the unit only Prepare a CD or an MD as the source soundRepeat to program other tracks To stop any time during editing process and start Triple Recording Long Recording Prepare the source you want to record from Editing MDs Introducing MD Editing Functions Press MD Edit Divide FunctionTo join the divided tracks again, see the Join function Join Function Move FunctionTo divide the joined tracks, see the Divide function Rotate the right jog dial until Move ? appears Press SET CANCEL, then select the correct track number again Erase FunctionEdit MD deck B starts playing the MD ALL Erase Function Assigning Titles to MDs Assigning a Title Using the Unit Changing the Title Press Enter Start to finish the current title entryYou can make a correction or change the title Make sure that the character you want to change is flashing Track title entry indication mode appears when Press MD Title InputPress the button for the next character you want to input Press Enter to finish the current title entry You can assign titles during play or recording Using the Timers PO WER Using Recording Timer How Recording Timer actually worksTo turn on or off Recording Timer after its setting is done To turn on the Recording Timer, press SET Using Daily Timer How Daily Timer actually worksVolume level will be set the previous level when Unit is turned off Using Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance To clean the CDGeneral Notes Handling CDs Utoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic Coding Sound Skip Guard Memory MD limitations Troubleshooting Symptom Possible Cause Action Signification Solution MD Messages Specifications EN, FR JVC 0199KSMMDWJEM