ENGLISH
Input Signal > Aspect (Computer)
17Aspect (Computer)
Configures the screen size of the projected image.
| Auto | Enlarges the PC signal horizontally/vertically until it fits the panel height, and displays |
| it in the original aspect ratio. | |
|
| |
| 1:1 | Displays the PC signal corresponding to the panel at one dot per pixel ratio. The PC |
| screen can be shown in the original size. | |
|
| |
| Full | Enlarges the PC signal horizontally/vertically. |
●This setting can also be configured from the remote control. (
P16)
Input Signal > V-Stretch (when HD or SD video signals are input)
18V-Stretch
When set to “On”, the projected 2.35:1 image will be stretched vertically to the panel resolution.
| On | The projected 2.35:1 image will be stretched vertically to the panel resolution. |
| Off | Projects the 2.35:1 image |
“Off” |
| “On” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Input Signal > Over Scan
19Over Scan
Selects whether or not to set over scan for the SD video signal.
| On | Over scan the top, left, bottom and right at 2.5% each. |
| Off | Do not over scan. |
●This setting is not available when HD signal or PC signal is input.
Input Signal > Mask
20Mask
Masks (Hides) the outer area of the projected image.
| 2.5% | Mask 2.5% of the screen. |
| 5% | Mask 5% of the screen. |
| Off | No masking. |
●Masking is available only when high definition images are input.
Input Signal > Film Mode
21Film Mode
Selects this to view movies shot on film.
| Auto | For normal circumstances, select this setting. |
| Off | Select this when you are not watching movies shot on film. |
●This setting is not available when a progressive signal is input.
Getting Started
Preparation
Basic Operation
Settings
Troubleshooting
Others
37
