7
Setting up your TV
ENGLISH
PD-42/35DX(ASIA) / LCT1373-001A / English

Preparing the subwoofer

Either stand the subwoofer vertically or lay it down on its side, peel the
paper from the supplied rubber feet, and stick the feet in the four corners on
the surface to be used as the base. The rubber feet prevent slipping and
resonance, and also protect the speaker cord.
• The subwoofer is not designed to withstand electromagnetic fields. Furthermore, it vibrates in operation and should therefore
not be installed near equipment such as VCR, or equipment where it will be subject to vibration or electromagnetic fields.
Installation
Cautions for installation
• Do not tilt the TV towards the left or right, or towards the back.
• Install the TV in a corner on a wall or on the floor so as to keep cords out of the way.
• Grip the TV (not the front speakers) when moving or installing it after mounting the front speakers to the TV.
• The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow
satisfactory cooling.
Putting the batteries into the Remote control
Use two AAA/R03 dry cell batteries.
Insert the batteries from the - end, making sure the + and - polarities are correct.
• Follow the warnings printed on the batteries.
• Battery life is about six months to one year, depending on your frequency of use.
• The batteries we supply are only for setting up and testing your TV, please replace them as soon as necessary.
• If the remote control does not work properly, replace the batteries.
Above the TV: 200 mm or more
Left and right of the TV: 150 mm or more
Behind the TV: 50 mm or more
Above, behind, left and right of the receiver: 100 mm or more
Subwoofer
Mounting example:
Subwoofer to be used
lying down
Rubber feet
Installation example:
MENU
OK
PTV/VIDE
PD-42&35DX_Eng.book Page 7 Tuesday, January 28, 2003 5:39 PM