Setting up your TV

1Turn on the VCR

2Press the a button

The data transmission begins.

TV RECORDING DEVICE

TRANSFER. . . . .

D0037-EN

T-V LINK functions

When you have a T-V LINK compatible VCR connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features:

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu is changed over to another menu: The TV has finished its menu. This new menu is operated from the VCR. See the VCR instruction manual for what to do next.

If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu: Check the following three items. Then press the 2button to retry data transmission.

Has a T-V LINK compatible VCR been connected to the EXT-2 terminal?

Has the VCR power been turned on?

Does the SCART cable that is connected to the EXT-2 terminal to T- V LINK compatible VCR have all its proper connections?

To use T-V LINK functions:

A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos. However, these VCRs may support some or all of the features described earlier. For details, see your VCR instruction manual.

“Q-LINK” (a trademark of Panasonic Corporation)

“Data Logic” (a trademark of Metz Corporation)

“Easy Link” (a trademark of Phillips Corporation)

“Megalogic” (a trademark of Grundig Corporation)

“SMARTLINK” (a trademark of Sony Corporation).

„Pre-set download

The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the program channels on your VCR manually. The preset download function automatically begins when the initial setting is complete or whenever you carry out the AUTO PROGRAM or EDIT/MANUAL functions.

You can also carry out this function using your VCR controls.

When “FEATURE NOT AVAILABLE” is displayed:

If “FEATURE NOT AVAILABLE” is displayed, the download was not performed correctly. Before trying to download again, check that:

the VCR power is turned on

the VCR is T-V LINK compatible

the VCR is connected to the EXT-2 terminal

the SCART cable is fully wired.

12

Page 14
Image 14
JVC PD-42X50BU, PD-42X50BJ, PD-42X50BS manual Link functions, „ Pre-set download, Turn on the VCR Press the a button