„ Colour System | JVC PD-42X50BU, PD-42X50BJ, PD-42X50BS guide

PICTURE menu

COLOUR SYSTEM

The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.

1Choose COLOUR SYSTEM. Then press the a or 3 button

The sub-menu of the COLOUR SYSTEM function appears.

>> COLOUR SYSTEM

MAIN	SUB
PAL	AUTO

OK

D0016-EN

2Press the 5 buttons to choose MAIN or SUB

MAIN:

You can change the colour system of the main-picture.

SUB:

You can change the colour system of the sub-picture.

•Choose MAIN when a sub-picture is not displayed.

3Press the 6 buttons to choose the appropriate colour system. Then press the a button

PAL:

PAL system

SECAM:

SECAM system

NTSC 3.58:

NTSC 3.58 MHz system

NTSC 4.43:

NTSC 4.43 MHz system

AUTO:

This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or an EXT terminal.

•The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.

•When in the Programme numbers PR 0 (AV) to PR 99, you cannot choose NTSC

3.58 or NTSC 4.43.

SECAM cannot be chosen when the COUNTRY setting is UNITED KINGDOM.

•COLOUR SYSTEM cannot be chosen when you are watching the EXT-4 picture, EXT-6 (HDMI) picture or a PC picture.

4:3 AUTO ASPECT

You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio).

1Choose 4:3 AUTO ASPECT then press the a button

>> 4:3 AUTO ASPECT

PANORAMIC

REGULAR 14:9 ZOOM

OK

D0017-EN

2Press the 6 buttons to choose a ZOOM mode

32

Image 34

JVC PD-42X50BU, PD-42X50BJ, PD-42X50BS manual „ Colour System, „ 43 Auto Aspect

Contents

PD-42X50BU PD-42X50BJ PD-42X50BS „ If in doubt consult a competent electrician How to replace the fuse„ Warning „ Guidelines for safe operation Distance recommendations Avoid burn-in as follows „ Do not view for long periods of time in the Regular modeBurn-in If Burn-in has occurred Effect on infrared devices Pixel defectsPicture Management demonstration Contents Checking the contents of packages Installation Setting up your TV„ Only use JVC approved accessories with your model Connecting the aerial and video cassette recorder VCR Decoder EXT-2 on „ Rear Panel Connecting the power cord to the AC outletPutting the batteries into the remote control Attaching the ferrite cores Press the a button Initial settingsPress the Abutton on the TV Press the a button to display the T-V Link menu Press the blue button to start the Auto Program functionIf you do not have a T-V Link compatible VCR connected „ Downloading the data to VCR If ACI Error is displayed in the Auto Program menu„ ACI function If ACI START/ACI Skip appears in the Auto Program menu „ Pre-set download When Feature not Available is displayedLink functions Turn on the VCR Press the a button „ Direct Rec Using the Menu Turn the TV on from standby modeAdjust the volume TV buttons and functions Turn the TV on or off from Standby mode Remote control buttons and functionsPress the # standby button to turn TV on or off To return to a TV channel Choose a TV channel and watch images from external devicesTo use the programme number PR 0 AV Channel number display Press the r q buttons to adjust the volumeInformation function Time display „ Choose the Zoom mode Zoom function 3D Sound function Using the Freeze function„ Adjusting the visible area of the picture Return to TV channel instantly Press the Xbutton Using the MULTI-PICTURE functionPictures multi To return the multi-picture to one screen „ Favourite channel registration „ Setting the picture effectFavourite channel function „ Calling the favourite channel „ Showing the favourite channels Set the VCR/TV/DVD Switch to the VCR or DVD positionOperating a JVC brand VCR or DVD player VCR Teletext function Using the List ModePress B button to go into the List mode Basic operation Reveal HoldSub-page Size Index CancelPress H Cancel button Press the G Index button Using the TV’s menu Press the Hbutton to display the menu bar Using the TV’s menu Picture menu „ Digital VNR Features„ Super DigiPure „ Movie Theatre „ Colour Management„ Picture Management „ Colour System „ 43 Auto Aspect Sound menu Speaker BBECentre Child Lock Features menuSleep Timer „ To set the Child Lock function Blue Back Appearance„ To view a locked TV channel Refresh Favourite SettingChoose Favourite SETTING, then press the a or 3 button Choose Refresh Press the a button Auto Program SET UP menuEDIT/MANUAL Choose EDIT/MANUAL, then press the a or 3 button „ Basic operation„ Move Press the 3 button to start the Move function Press the yellow button to delete the TV channel „ Delete„ ID Press the red button to start the ID function United Kingdom „ Insert„ Manual France Language Decoder EXT-2 ID List EXT Setting„ S-IN S-VIDEO input Dubbing Press the 5 or 6 buttons to choose an EXT terminal To cancel the S-IN S-VIDEO input setting„ ID List To erase a name assigned to the EXT terminal „ Dubbing Hdmi SettingPicture Shift Slow When a picture is not displayed Connecting to the computerTable of signals for each type of computer Displaying a computer screen Before connecting anything Connecting external equipment„ Connecting the PC Additional preparation „ Video or sound signal output from the EXT-2 terminal „ Connecting headphones„ Connecting speakers/amplifier „ T-V Link compatible VCR „ Using the TV speaker as the surround centre speaker „ Connecting a Hdmi compatible device Using the Hdmi terminal„ Setting Hdmi Setting When setting Audio When setting SizePress the 6 buttons and choose Size or Audio CH/CC numbers Channel CH/CC numbers „ If you cannot turn off the TV Troubleshooting„ If you cannot turn on the TV „ No picture or no sound „ Other issues „ If the TV does not respond to the remote control„ Poor sound Specifications We may change the design and specifications without notice