Pioneer DEH-P80RS Audio Adjustments, Switching left and right, channel, Black plate 49,1, English

Audio Adjustments

F/B (balance adjustment)—POSI (position se- lector)—TA1 (time alignment setting)—TA2 (time alignment adjusting)—LOUD (loudness)

—EQ 1 (graphic equalizer)—EQ 2 (16-band graphic equalizer)—SW 1 (subwoofer on/off)

—SW 2 (subwoofer cut-off frequency)—SW 3 (subwoofer slope)—F.HPF 1 (front high pass filter slope)—F.HPF 2 (front high pass filter cut-off frequency)—R.HPF 1 (rear high pass fil- ter slope)—R.HPF 2 (rear high pass filter cut- off frequency)—BBE (BBE)—BMX (BMX and compression)—A.EQ (auto-equalizer on/off)— SLA (source level adjustment)

#You can also switch between the audio func- tions in reverse order by turning MULTI-CONTROL counterclockwise.

#When tuner, television or AUX is selected as a source, you cannot select BMX.

#When selecting the FM tuner as the source, you cannot switch to SLA.

#When selecting a source other than built-in CD player, multi-CD player, DVD player/multi-DVD player or iPod, you cannot select BMX.

#When selecting TA OFF in TA1, you cannot switch to TA2.

#You can select SW 2 and SW 3 only when sub- woofer output output is turned on in SW 1.

#To return to the display of each source, press BAND.

Notes

!If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.

!EQ 2 (16-band graphic equalizer), TA2 (time alignment adjusting), NW 1 (network adjust- ment 1), NW 2 (network adjustment 2), NW 3 (network adjustment 3) and NW 4 (network

adjustment 4) functions are not canceled automatically.

Black plate (49,1)

	Section
	11
	English
Switching left and right
channel

You can adjust following functions for left and right channel independently or commonly.

3-way network mode

!Adjusting network (NW 1, NW 2, NW 3)

!Adjusting 16-band graphic equalizer (EQ 2)

Standard mode

!Adjusting subwoofer settings (SW 2)

!Adjusting low pass filter attenuation slope (SW 3)

!Setting the high pass filter for front speakers (F.HPF 1, F.HPF 2)

!Setting the high pass filter for rear speakers (R.HPF 1, R.HPF 2)

!Adjusting 16-band graphic equalizer (EQ 2)

1Use MULTI-CONTROL to select the audio function described above.

2Press MULTI-CONTROL and hold to switch between left/right independent mode and left/right common mode.

Each pressing and holding MULTI-CONTROL selects left/right independent mode and left/ right common mode.

3Press MULTI-CONTROL to select left channel or right channel when left/right in- dependent mode has been selected.

Each pressing MULTI-CONTROL selects left channel and right channel.

4Adjust these functions as desired.

En 49

<CRD4082-A/N>49