Programmed playback of an audio CD
Up to 20 tracks can be programmed to play in any desired order.
1 | 3 | 6 | 2,4 | 6 | 1 | 2,4 | 3 |
STANDBY
1Press the CD/RANDOM button to enter CD mode.
2Press the PROGRAM button in stop mode. Alternatively, press the PROGRAM/SET button on the remote control unit.
The PROG. indicator and the current track number start blinking in the display window.
3 Press the 4 or ¢ button to select a desired track to be programmed.
Alternatively, use the number buttons on the remote control unit.
3
4Press the PROGRAM button.
“OK” is displayed and the PROG. indicator lights up steadily.
5Repeat steps 2 to 4 to program other tracks.
6Press the 3/8 button to start programmed playback.
To clear the program, press the 7button in stop mode. “PROG CLEARED” scrolls through the display window. The program is also cleared when you open the disc door.
To check the programmed tracks, press the 4 or
¢button repeatedly in stop mode.
Each time you press the button, the program number and track number are displayed in the display window.
Note:
You cannot program more than 20 tracks. “PRG FULL” is displayed when you try to program the 21st track.
13
