Initial Setup
Set Lock Code
Channel guard and
Press the MENU button |
|
Initial Setup > Set Lock Code | |
|
|
π† | To "Initial Setup" |
è | To enter |
π† | To "Set Lock Code" |
è | To operate (Password input screen will appear) |
| Enter the password by using the 10 keypad |
Lock Code | 0 |
| 1 |
| 2 |
| 3 |
| ||
|
|
|
|
| ||||||
Set |
|
|
|
| Clear | |||||
The Set Lock Code screen will appear | OK | BACK |
| MENU |
| Select | Operate | Back | Exit |
|
To set the password, use the 10 keypad
Press the OK button to finish (your lock code is now set)
When a viewer attempts to watch a blocked channel, this message appears:
The channel will remain blocked until the correct lock code is entered (see above for information on setting your lock code).
Notes:
• After a power interruption you must reset the lock code.
This programming exceeds
your rating limits. Please enter lock code
by 10 key pad to unlock it.
No. - - - -
• Write your lock code number down and keep it hidden from potential viewers.
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the Lock Code using the 10 key pad.
If the wrong code is entered, the message "Invalid Lock Code !” will appear on the screen.
The channel cannot be accessed until the correct code is entered.
Notes:
This channel is locked by channel guard.
Please enter lock code by 10 key pad to unlock it.
No. - - - -
•Once a channel has been unlocked, it will remain unlocked until the television is turned off.
•See also “Set Lock Code”.
36
