JVC RM-C1450 manual Auto Shut Off, Software Version, Power Indicator

Initial Setup

Auto Shut Off

This function automatically shuts off your TV when there is no signal from the channel and no operation if the TV is on for 10 minutes.

	Press the MENU button
		Initial Setup					2/2
π†	To "Initial Setup"
è	To enter		Auto Shut Off				Off
			Software Version
π†	To "Auto Shut Off"
			Power Indicator				High
è	To turn "On" or "Off"
			Optical Out				PCM
	Press the MENU button when finished		Quick Start-up				Off
• If the channel that you have on does not receive a			Select	Operate		Back	Exit
					BACK		MENU

signal for more than one minute, the blinking text “No

Program or Weak Signal Auto shut off in 9 min.” appears on the screen, and starts the countdown. If no signal is being received within 10 minutes, the TV shuts itself off.

Software Version

You can confirm the Software Version.

	Press the MENU button
π†	To "Initial Setup"
è	To enter
π†	To "Software Version"
è	To enter
	Press the OK button to close
	Press the MENU button when finished

Initial Setup						2/2
	Auto Shut Off				Off
	Software Version
	Power Indicator				High
	Optical Out				PCM
	Quick Start-up				Off
		OK		BACK		MENU
	Select		Operate		Back	Exit

Power Indicator

Power indicator allows you to adjust the brightness of the power indicator.

	Press the MENU button
π†	To "Initial Setup"
è	To enter
π†	To "Power Indicator"
è	To turn "High", "Low" or "Off"
	Press the MENU button when finished

Notes :

•When Off is selected :

The LED disappears if you have a TV signal.

The LED is lit as “Low” when there is no TV signal.

Initial Setup						2/2
	Auto Shut Off
					Off
	Software Version
	Power Indicator
					High
	Optical Out
					PCM
	Quick Start-up				Off
		OK		BACK		MENU
	Select		Operate		Back	Exit

•When the On Timer turns On, the LED is lit as "Low" when you turn the power off.

•If you set a timer on the TV, the power indicator will light even if the TV is on stand by.

39