Connection

Rack Mounting

Mount this unit to the EIA rack.

 

1. Remove the screws 1 on the four stands at

 

the bottom

 

Remove the stands.

Rack mount bracket

2. Mount the unit to the rack using the screws 2

 

Secure to the rack with the optional screws (x4) (M5 x 10

 

mm).

2

2

1 (x4)

NOTE

If the RM-HP250 is rack-mounted, be sure to insert ventilated panels above and below it in order to improve ventilation. Do not stack two RM-HP250 units or place any object on top of a RM-HP250 unit.

In addition, make sure to keep surrounding temperature of this unit below 40°C during use.

Turning the Power ON

REMOTE CONTROL UNIT RM-HP250

PAINT

WHITE AUTO

MASTER BLACK

IRIS

POWER

P

 

W.BAL

 

 

 

 

B

 

I

 

 

 

 

MID

 

A

AUTO

 

R

B

 

 

PRESET

MANU

 

 

 

 

 

O

 

 

 

CLOSE

OPEN

POWER switch

NOTE

1. Connect the camera to the RM-HP250using a proper connection method.

2. Press the POWER switch of the RM-HP250 to ON.

●When an item is controllable from both the RM-HP250 and the camera, the control from the camera is defeated. Functions not available on the camera cannot be controlled from this unit.

●When connecting the RM-HP250 to the camera, do not connect a local remote controller to the camera.

●After turning the RM-HP250 OFF, wait at least 10 secends before turning it ON again.

11