Menu Operation
FILE Menu
The values set with the menu and applied to the
and D.
FULL AUTO | F1 | F3 | MENU/SHUTTER | GAIN | P | |
|
| SHUTTER |
|
| STEP | |
|
| 3. FILE |
|
| HIGH |
|
|
|
| SHUTTER | VARIABLE | MID | |
|
|
|
| |||
BARS | F2 | F4 | MENU | R | ||
| LOW | |||||
|
| GAIN |
|
|
|
|
M |
|
|
| DOWN UP | DOWN UP |
|
Control knob
LCD display | MENU button |
1. Press and hold the MENU button for 3 seconds until the LCD display shows the menu display. The cursor (
) indicates that the item being pointed to can be varied.
1.
1: GEN LOCK
2:CABLE
Cursor
2.
3: FILE
4:PROCESS
3.
3A: LOAD FILE
A
4.
3B: STORE FILE
|
|
|
| A |
5. |
|
|
| |
| 3B: STORE FILE |
| ||
|
|
|
| A |
6. |
|
|
| |
| 3B: STORE FILE |
| ||
|
|
|
| B |
7. |
|
|
|
|
| STORE FILE B |
|
| |
|
|
|
| CANCEL |
8. |
|
|
|
|
|
|
|
| |
| STORE FILE B |
|
| |
|
|
|
| EXECUTE |
9. |
|
|
|
|
|
|
|
| |
| STR | OFF | ALC | |
|
| CMP | 0 dB | LUX |
|
|
|
|
|
2. Turn the control knob to move the cursor (
) to “3: FILE”.
3. Press the control knob to move the cursor (
) below to “3A: LOAD FILE”.
Storing data in a file
4. To store data in one of the two files, press the control knob to move the cursor (
) to the “3B: STORE FILE”.
5. Press the control knob again to move the cursor (
) to the position indicating “A”.
6. To store data in file B, turn the control knob to move the cursor (
) to file “B”. (Similar for C, D)
7. If the control knob is pressed now, the LCD display shows “STORE FILE B” and the cursor (
) moves to “CAN- CEL”. If it is not required to write data now, the control knob should be pressed again.
8. To store data in a selected file, turn the control knob to move the cursor (
) to “EXECUTE”.
9. Press the control knob to write data in a selected file and return to the previous display.
Loaging the data in a file
To read previously written data, in step 3. move the cursor (
) to “3A: LOAD FILE”, then perform the same operations as in steps 4. to 9.
Resetting data in a file
To reset saved data to the factory settings, in step 3 move the cursor (
) to “3C: RESET FILE”, then perform the same operations as those in steps 4. to 9.
NOTE
During LOAD FILE and RESET FILE, “NOW INITIALIZING” and “JUST A MOMENT” will be displayed on the LCD.
22