JVC RM-RXUV9RMD manual Dividing Tracks DIVIDE Function, Press the SET button, English

Dividing Tracks

(DIVIDE Function)

■Use the Remote Control to carry out this function.

■1. Insert an MD to be edited with its label side up.

■2. Press the MD #8 button and then 7 button to set the function to MD.

The track numbers and total playback time are displayed.

■3. Press the EDIT/TITLE button until “DIVIDE ?” is displayed.

The “EDIT” indicator appears on the display.

EDIT

/TITLE	DIVIDE=JOIN=MOVE=ERASE=ALL ERASE
	=DISC TITLE=TITLE=(Back to the beginning)

■4. Press the SET button.

Track to be divided Playback time of the track

SET

•The first track will be repeatedly played.

■5. Select the track number to be divided.

The selected track is automatically played.

To select the track number, press the UP, DOWN, >, or < button.

UP button:	Increases the track number by 1.
DOWN button: Decreases the track number by 1.
> button:	Rapidly increases the track number.
< button:	Rapidly decreases the track number.

Example: For track 3, press the UP button three times. For track 12, use the > button to rapidly increase the track number (or simply press the UP button 12 times.)

■6. Press the SET button at the point where the track is to be divided.

SET

•The selected track is divided into two tracks and the track number in the music calendar will increase by 1.

•The recording lasting for 4 seconds starting where the track was divided is repeatedly played for your reference.

•Movement is possible within the POSITION-128 to 128 range (about 8 seconds before or after the position). To move the point, press the UP, DOWN, > or < button. The recording last- ing for 4 seconds starting from the position to which the divid- ing point has been moved is repeatedly played.

■7. Press the SET button.

Alternates

SET

■8. Press the EDIT/TITLE button.

The “EDIT” indicator disappears on the display.

■9. Press the MD 0 button to complete editing.

The MD is ejected after “UTOCwriting” is displayed.

•You can also complete editing operation by pressing the

button to turn off the power.

To cancel the operation, press the CANCEL button in step 4 through 7 until the display returns to the original display before ed- iting the track.

Note: While “UTOCwriting” is displayed, do not disconnect the power cord or subject the Unit to the vibration to avoid in- correct recording.

English

19