![](/images/new-backgrounds/1301815/30181511x1.webp)
CONNECTIONS
ÖDo not switch the power on until all connections are completed.
Connection of external audio units
ÖConnection with a turntable or MD player, etc.
Connection cable (optional)
AUX IN
Stereo
Turntable (with
L
R
AUX IN
CAUTION
AC IN
12V
PHONES
DC IN
Note:
ÖDo not install the unit near a TV, otherwise the TV picture color will become distorted. If this occurs, move the TV away from the unit, then turn off the TV and turn it on again after 15 to 30 minutes. The TV’s automatic degaussing circuit will correct the picture.
POWER SUPPLY
A. Operation on household AC
ÖConnect the AC power cord after all other connections have been made.
îAC IN | Power cord |
CAUTIONS:
1.ONLY USE WITH JVC POWER CORD PROVIDED WITH THIS UNIT TO AVOID MALFUNCTION OR DAMAGE TO THE UNIT.
2.BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE UNIT IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
B. Batteries for memory back-up system
It is recommended that batteries are loaded to prevent the preset station memory and timer, etc. from being erased when there is a power failure, or when the AC power cord is disconnected.
ÖLoading batteries
Load three “R6/AA (15F)” size batteries (optional) into the battery compartment.
ÖOpen the battery cover by pulling it toward you while pressing the sections marked with arrows.
Battery compartment cover
ÖInsert batteries with áend first in the order shown.
Notes:
ÖThe three “R6/AA (15F)” size batteries supply the power to the memory
(When the memory backup function is activated, the time is not displayed to reduce power consumption.)
ÖWhen the power cord is not connected or the “R20/D (13F)” size batteries are not loaded, the batteries should be replaced with new ones approximately every 12 months.
(Connect the AC power cord when replacing batteries in order to back- up the memory.)
“R6/AA (15F)” size batteries
1
3
2
ÖWhen removing the batteries, remove battery number 3 first.
6