Using Surround Modes
Once you have adjusted the surround mode, you can use the same adjustments every
time you want to enjoy Surround Modes.
From the front panel:
1. Press SURROUND so that the Control %/ Þbuttons work for selecting the
The lamp above the button lights up.
2. Press Control %/ Þ to select one of the surround mode (“PRO LOGIC,” “3CH LOGIC” or “THEATER”).
Each time you press the button, the surround/DAP/3D- PHONIC modes change as follows:
SURROUND
Note:
When one of the surround modes is selected, the corresponding indicator lights up on the display.
Ex. 
PROLOGIC 
THEATER 
3CHLOGIC
OFF 
3DACTION* 
PAVILION* 
*As for the
3.Select and play a sound source which was processed with Dolby Surround and
is labeled with 
DOLBY SURROUND mark.
To cancel surround mode
Select “OFF” in step 2 above.
From the remote control:
1.Press SOUND CONTROL so that 10 keys work for adjusting the sound.
2.Press SURROUND until the mode you want appears on the display.
SOUND
CONTROL
SURROUND
3
The previous mode is recalled at first (with its previous settings) and is shown on the display.
The indicator for that mode also lights up on the display. Each time you press the button, the surround modes change as follows:
| THEATER |
| 3CHLOGIC |
|
| PROLOGIC |
| |
|
|
|
| |||||
|
|
|
| OFF |
|
|
|
|
|
|
|
|
|
|
|
| |
3.Select and play a sound source which was processed with Dolby Surround and
is labeled with 
DOLBY SURROUND mark.
To cancel surround mode
Select “OFF” in step 2 above.
32
