JVC RX-D206B, RX-D205S manual Connecting video components, English, ıÇ Î ‰ Ï Ì

Connecting video components

Do not connect the AC power plug to the wall outlet until all connections are completed.

English

This receiver is equipped with the following video terminals— composite video, S-video, and component video terminals.

•If your video components have S-video (Y/C-separation) and/or component video (Y, PB, PR) jacks, connect them using an S- video cable (not supplied) or component video cable (not supplied). By using these terminals, you can get better picture quality in the order:

Component > S-video > Composite

IMPORTANT:

The video signals from one type of these input jacks are transmitted only through the video output jacks of the same type. Therefore, if a recording video component and a playing video component are connected to the receiver through the video terminals of different type, you cannot record the picture. In addition, if the TV and a playing video component are connected to the receiver through the video terminals of different type, you cannot view the playback picture on the TV.

Turn off all components before making connections.

•When you connect other components, refer also to their manuals.

DO NOT use a TV through a VCR or a TV with a built-in VCR; otherwise, the picture may be distorted.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

If your video components have AV COMPU LINK terminal

See also page 32 for detailed information about the connection and the AV COMPU LINK remote control system.

7 Connecting a DVD recorder or DVD player

COMPONENT VIDEO Green

YBlue

PBRed

PR

VCR(DBS)	DVR/DVD	MONITOR
IN	IN	OUT

DVR	DVR/DVD	White
OUT(REC)	IN(PLAY)

Red

DVR DVR/DVD

OUT(REC) IN(PLAY)

Red

White

S-video cable (not supplied)

Component video cable (not supplied)

Å

DVD recorder or DVD player

ıÇ Î ‰ Ï Ì

Stereo audio cable (not supplied)

Composite video cable (not supplied)

Composite video cable (not supplied)

NOTES

•When connecting a DVD recorder or DVD player to the component video input jacks, select the component video input mode (DVD VIDEO IN) correctly. If you do not, you cannot view the playback picture on the TV or the AV COMPU LINK remote control system cannot operate properly. See page 20 for details.

•When using a stereo audio cable as the illustration above, set the audio input mode to “ANALOG.” For details, see “Selecting the analog or digital input mode” on page 12.

•You can enjoy digital sound if using a digital coaxial or optical cable. When shipped from the factory, the digital input terminal setting for a DVD recorder and DVD player is set to use the digital coaxial terminal (DIGITAL IN 1 (DVR/DVD)). For details of digital connection, see page 10.

ÅTo component video output

•Connect Y, PB, and PR correctly. ı To left/right audio channel output

Ç Only for DVD recorder: To left/right audio channel input

Î To composite video output ‰ To S-video output

Ï Only for DVD recorder: To S-video input

Ì Only for DVD recorder: To composite video input

7