JVC RX-D206B, RX-D205S manual Auto Surround is the initial setting

Activating the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. For details, see page 30.

Activating one of the Surround/DSP modes automatically recalls the memorized settings and adjustments.

• To adjust the speaker output level, see page 22.

• When activating one of the Surround/DSP modes, you

can adjust CENTER TONE. (see page 24)

• When activating one of the Surround/DSP modes

(except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, and

ALL CH STEREO), you can adjust CENTER ALIGN. (see

page 24)

• When activating NEO:6 MUSIC, you can adjust CENTER

GAIN. (see page 24)

• When activating the DSP mode (except ALL CH

STEREO), you can adjust the following settings:

EFFECT (see page 23)

LIVENESS (see page 23)

ROOM SIZE (see page 23)

• When activating “PLIIx MUSIC” and “PLII MUSIC,” you

On the front panel:

2 1,3

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1Select and play any source.

•Make sure you have selected the input mode (analog or digital) correctly.

2Press SURROUND.

MULTI JOG now works for selecting Surround/DSP modes.

3Turn MULTI JOG to select the Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital multi-channel software:

DIGITAL AUTO L C R

English

DIGITAL

S.WFR LFE

can adjust the following settings:

CENTER WIDTH (see page 24)

DIMENSION (see page 24)

PANORAMA (see page 23)

Selecting the Surround/DSP modes

From the remote control:

2

1

1Select and play any source.

•Make sure you have selected the input mode (analog or digital) correctly.

2Press SURROUND repeatedly to select the Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital multi-channel software:

DIGITAL AUTO L C R

LS RS

AUTO SURROUND*1 Surround modes*2

HALL1HALL2LIVE CLUBDANCE CLUB

PAVILIONTHEATER1THEATER2 MONO FILM*3ALL CH STEREO*4

SURROUND OFF (Back to the beginning)

*1 “AUTO SURROUND” is the initial setting.

*2 Available Surround modes vary depending on the speaker settings and the incoming signals. For details, see page 30.

*3 If an incoming signal is a multi-channel (2 channel or more) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “<NO>,” “ALL CH STEREO” is not available.

To cancel Surround/DSP modes

Turn MULTI JOG so that “SURROUND OFF” appears on the display.

When you select “AUTO SURROUND”

You can enjoy the Surround mode easily.

• For details about the Surround modes, see page 30.

DIGITAL

S.WFR LFE

• When “AUTO SURROUND” is activated, the AUTO SURR indicator

LS RS

AUTO SURROUND*1 Surround modes*2

HALL1 HALL2 LIVE CLUB DANCE CLUB

PAVILION THEATER1 THEATER2 MONO FILM*3 ALL CH STEREO*4

SURROUND OFF (Back to the beginning)

*1 “AUTO SURROUND” is the initial setting.

*2 Available Surround modes vary depending on the speaker settings and the incoming signals. For details, see page 30.

*3 If an incoming signal is a multi-channel (2 channel or more) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “<NO>,” “ALL CH STEREO” is not available.

To cancel Surround/DSP modes

Press SURROUND repeatedly so that “SURROUND OFF” appears on the display.

lights up on the display.
How does “AUTO SURROUND” work?
•	If a multi-channel signal comes in, an appropriate Surround
	mode will be selected automatically.
•	If a Dolby Digital 2-channel signal with surround signal
	comes in, “PLIIx MOVIE” or “PLII MOVIE” will be selected.
•	If a Dolby Digital 2-channel signal without surround signal
	comes in, “SURROUND OFF (stereo)” will be selected.
• If a Linear PCM signal comes in, “SURROUND OFF
	(stereo)” will be selected.

NOTE

“AUTO SURROUND” does not take effect in the following cases:

–While playing an analog source,

–While selecting one of the fixed digital input mode—“DOLBY DIGITAL” or “DTS” (see page 13).

31