JVC RX-DP15B Zone 2 (Sub-room)Operations, IMPORTANT:, The volume, On the unit:, mode appears, The last Zone, source appears, The Zone 2 volume, 1. Press (STANDBY/ON)

Zone 2 (Sub-room) Operations

This section explains only the operations used when you play a sound source in Zone 2.

See pages 22 to 28 for the Zone 1 operations.

•Before performing the Zone 2 operations, it is recommended to finish the basic settings on pages 35 to 44.

IMPORTANT:

Check the following before or while using the buttons and controls.

For Zone 2 operations:

The ZONE 2 ON/OFF lamp on the unit is lit.

• When using the unit:

– “ZONE 2” is shown in the main display.	DOOR
– Press DOOR DOWN to use the buttons inside the
	DOWN
front door.
To close the front door, press DOOR UP.

•When using the remote control:

Turning the Power On and Off (Standby)

and Selecting the Zone 2 Operations

On the unit:

1. Press (STANDBY/ON).

The STANDBY lamp goes off, and the ZONE 1 ON/OFF lamp lights up.

The front door moves down so that the source selecting buttons appear.•The unit is now activated only for Zone 1 operations.

When operating the receiver using the remote control, the display on the unit always shows the Zone 1 source information though you are operating it for the Zone 2 source.

– Set the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector to “ZONE 2.”

STANDBY

STANDBY /ON

ZONE 1

– Check the indication shown on the remote’s display when you

press a button—this indicates the remote control operation mode

together with multi-room operation mode (either ZONE 1 or

ZONE 2) for a while.

		LEARN	TRANSMIT
			STANDBY	ON
		ZONE 1	ZONE 2
LEARN	TRANSMIT	ZONE 1	ZONE 2 TV/CATV/DBS	VCR 1
		ON/OFF	ON/OFF
			STANDBY/ON	STANDBY/ON
			ZONE 2
ZONE 1	ZONE 2

Ex. When you press FM/AM with ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector set to “ZONE 2.”

To use the Zone 2 TV (connected to the ZONE 2 MONITOR OUT jack)Turn on the TV and select the correct input for this receiver manually.

For those who connect the Zone 2 front speakers to the ZONE 2 PREOUT jacks through another amplifier (see page 19)

You have to determine how to adjust the volume level through the Zone 2 front speakers. (See “w Setting the Zone 2/Speakers 2 Usage—ZONE 2/SPEAKER 2” on page 43 for more details.)

To use the Zone 2 front speakers

1Turn on the other amplifier connected to the ZONE 2 PREOUT jacks.

2Adjust the volume level through the Zone 2 front speakers either on the other amplifier or on this receiver (depending on the ZONE2PREOUT setting—see page 43).

ON/OFF

The last Zone 1 source is activated.

ANALOG	SPEAKERS 1
LR
SUBWFR	VOLUME
	dB
The last Surround/THX/DSP	The volume
mode appears.	level appears.

The currently selected speakers 1 and/or 2 indicator(s) light(s) up on the display.

2. Press ZONE 2 ON/OFF so that the	ON/OFF
	ZONE 2
ZONE 2 ON/OFF lamp lights up.

• When connecting the Zone 2 front speakers to the FRONT 2/ZONE 2 SPEAKERS terminals,

see also “w Setting the Zone 2/Speakers 2 Usage—ZONE 2/ SPEAKER 2” on page 43, and “Activating the Zone 2 Front Speakers” on page 32.

3. Press ZONE 2 CONTROL (inside			CONTROL
			ZONE 2
the front door) so that “ZONE 2”
and the previously selected Zone 2
source name appear on the display.
			SPEAKERS 1 ZONE 2
			VOLUME
				dB
	The last Zone 2	The Zone 2 volume
	source appears.	level appears.

Now the buttons and controls on the unit work for Zone 2 operations.

•Each time you press the button, the buttons and controls on the unit are activated or deactivated for Zone 2 operations.

29