JVC RX-DP15B again, (STANDBY), goes off.), press AUDIO, Zone 2 speakers, press (STANDBY/ON) again, Canceling the Zone 2 Operations, again, press ZONE 2 ON/OFF again

STANDBY

STANDBY /ON

To turn off the power (into standby mode),

press (STANDBY/ON) again.

The STANDBY lamp lights up, and the front door automatically closes. (The ZONE 1 ON/ OFF and/or ZONE 2 ON/OFF lamp goes off.)

•A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord.

From the remote control:

1. Set ZONE 1/ZONE 2 (LEARN/

TRANSMIT) selector to “ZONE 2.”	LEARN TRANSMIT
Now the buttons and controls on the remote
control work for Zone 2 operations.	ZONE 1 ZONE 2

2. Press AUDIO (ON).

The STANDBY lamp on the unit goes off, and the ZONE 2 ON/ OFF lamp on the unit lights up.

Canceling the Zone 2 Operations

On the unit:

To stop Zone 2 operations and sounds through the ZONE 2

ON/OFF

Zone 2 speakers, press ZONE 2 ON/OFF so that the ZONE 2 ON/OFF lamp goes off.

No sound will be heard in Zone 2, and the display changes to show the Zone 1 source.

SPEAKERS 1 ZONE 2

VOLUME

dB

	ANALOG	SPEAKERS	1
L	R
SUBWFR			VOLUME

dB

STANDBY ON

ZONE 2

ON/OFF

• When connecting the Zone 2 front speakers to the FRONT 2/

ZONE 2 SPEAKERS terminal, see also “w Setting the Zone

To use this receiver for Zone 2 operations again1.Press ZONE 2 ON/OFF again so that the ZONE 2 ON/OFF lamp lights up.2.Press ZONE 2 CONTROL (inside the front door).The name of the current source for Zone 2 appears on the display.

ZONE 2

ON/OFF

ZONE 2

CONTROL

2/Speakers 2 Usage—ZONE 2/SPEAKER 2” on page 43, and

“Activating the Zone 2 Front Speakers” on page 32.

To turn off the power (into standby mode),
press AUDIO	(STANDBY).	STANDBY	ON
The STANDBY lamp lights up, and the front
door automatically closes. (The ZONE 1 ON/
OFF and/or ZONE 2 ON/OFF lamp on the unit
goes off.)

Note:

If you have turned off the receiver with the volume level set at more than level “–35 dB,” the volume level will be automatically set at level “–35 dB” next time you turn on the receiver.

SPEAKERS 1 ZONE 2

VOLUME

dB

From the remote control:

To stop Zone 2 operations and sounds through the	ZONE 2
	ON/OFF
Zone 2 speakers, press ZONE 2 ON/OFF so that the

ZONE 2 ON/OFF lamp on the unit goes off.To use this receiver for Zone 2 operationsagain, press ZONE 2 ON/OFF again.

Notes:

•If you have turned off Zone 2 with the volume level set at more than level “–35 dB,” the volume level will be automatically set at level “–35 dB” next time you turn on Zone 2.

•If “TURN ON ZONE1 OR ZONE2” appears on the display, press ZONE 1 ON/OFF or ZONE 2 ON/OFF to listen to the sound in Zone 1 or in Zone 2; otherwise, the receiver will turn off after about 1 minute.

30