Advanced operations

Enlarging the picture (ZOOM)

(only for moving image)

1 Press ZOOM during playback or while paused.

•Each time you press the button, the picture magnification will be changed.

•(For a JPEG) You cannot change the picture magnification during slide-show playback.

2 Select the portion you want to see by using cursor 5/∞/2/3.

•To resume normal playback, select “ZOOM OFF” in Step 1.

Adjusting the picture quality (VFP)1 Press VFP during playback or while paused.

The current setting will be displayed on the TV screen.

•GAMMA: Adjust this if the neutral color is bright or dark. The brightness of dark and bright portion is maintained.

•BRIGHTNESS: Adjust this if the picture is bright or dark on the whole.

•CONTRAST: Adjust this if the far and near position is unnatural.

•SATURATION: Adjust this if the picture is whitish or blackish.

•TINT: Adjust this if the appearance of flesh tone is unnatural.

•SHARPNESS: Adjust this if the picture is indistinct.

2 Press cursor 2/3 to select VFP mode.

•It is recommended to select “NORMAL” usually, or “CINEMA” in a dark room. When

either “NORMAL” or “CINEMA” is selected, go to Step 7.

•When either “USER 1” or “USER 2” is

selected, the adjustment can be carried out in detail in the operations after Step 3.

3 Press cursor 5/∞ to select an item to be adjusted.4 Press ENTER.

Ex.:

 

TV screen

 

 

 

 

 

GAMMA

 

 

 

 

 

 

 

 

 

5 Press cursor 5/∞ to change the value.6 Press ENTER.

To adjust other items, go back to Step 3.

7 Press VFP to go off the window.

NOTE

•If no operation is made for several seconds during the procedure, the settings made so far will be automatically stored.

•“VFP” is an abbreviation of “Video Fine Processor”.

25