Using USB wireless transmission
WIRELESS
You can enjoy music from your PC through the wireless connection.
Remember you cannot send any signal or data to your PC from this system.
IMPORTANT
•Always set volume to “VOL MIN” when connecting or disconnecting the other equipment.
•When using USB wireless transmission to listen to music, AVOID
•any shock/vibration/knocking to the transmitter
•using any metal, plastic parts or your palm to cover up the transmitter
•putting either transmitter or main unit or both of them near the microwave oven
•plugging off the transmitter while playing back music and for several seconds until your PC detects the transmitter.
•For smooth operation, do not run too many applications simultaneously when your PC has been turned on.
2 Connect the supplied wireless transmitter to the USB connector of the PC.•Before connecting the transmitter to the PC, remove the cover of the transmitter.
•For WindowsR Me, WindowsR 2000, or WindowsR XP: When you connect the transmitter, the PC will detect the transmitter automatically.
For WindowsR 98/98SE: When you connect the transmitter for the first time, you need to install the driver (page 35).
•The POWER and PLAYER indicators on the transmitter light up.
SMITTER
Wireless transmitter
USB WIRELESS TRANSMITTER
POWER ID PLAYER
•If your PC does not detect the transmitter, disconnect the transmitter and connect it again. If it does not work yet, restart Windows.
3 Press WIRELESS.The system enters “wireless transmission” mode.
Behind the door
34