Convenient functions

4 Start the music application and play any music on your PC.

•The PLAYER indicator on the transmitter flashes.

USB WIRELESS TRANSMITTER

POWER ID PLAYER

Your PC music is transmitted to the system. Enjoy listening!

How to install the driver (for WindowsR 98/ 98SE)

For the first time the transmitter is connected, “Add New Hardware Wizard” appears after “New Hardware Found” message is shown for a while. Install the driver as follows using the Wizard.

•Prepare the WindowsR 98/98SE installation CD-ROM supplied with your PC

1Click “Next”.

2Select “Search for the best driver for your device (Recommended),” then click “Next”.

3Choose “CD-ROM drive” for the location of driver.

4Insert the WindowsR 98/98SE installation CD- ROM into the CD-ROM drive of the PC, then click “Next”.

•You may select to use “Specify a location” if your WindowsR 98/98SE drivers already exist inside your PC hard disc.

5Click “Next” again.

6Click “Finish” to complete the installation.

•You may need to restart Windows.

If the transmitter blocks usage of other USB ports

Use the supplied extension cable.

USB WIRELESS TRANSMITTER

Extension cable

NOTE

•Refer also to the manuals supplied with the music application software installed in the PC.

•When not using the PC as the playback source, disconnect the transmitter.

•The music may not be played back correctly— interrupted or degraded—due to your PC settings and PC specifications.

•The signal-reachable distance is about 20 m, but it may differ depending on the operating conditions and circumstances.

•Though the transmitter may become hot, it is not a malfunction.

If no music is played on the PC for about 30 minutes

The transmitter enters “sleep” mode (“SEARCHING” is displayed and the indicator behind the door flashes). Playing music from the PC will reactivate the wireless transmission.

•“NO AUDIO” is displayed and the indicator goes off 5 minutes after the system displays “SEARCHING” (or no music source is detected by the system).

Behind the door

35