Resume Playback

WIRELESS

NOTE

Set the remote control mode selector to AUDIO before using the number buttons.

This system can store the stop point, and when you start playback again by pressing DVD/CD 3 (even while on standby), it starts from the position where you have stopped—Resume Play. The RESUME indicator lights on the display window when you stop playback.

How to suspend playback

Perform any of the following operations during playback.

Press 7 once.*

Press AUDIO to turn off the power.

Change the source to WIRELESS, FM, AM or AUX.*

*Even if the power is turned off by pressing

AUDIO after this, the position where playback has been stopped will be stored.

To start playback from the stored position

Press DVD/CD 3.

NOTE

•This function does not work in Program Playback or Random Playback.

•The position where playback starts again may be a little different from the stopped position.

•When a disc menu is displayed, the Resume function may not work.

•The audio language, the subtitle language and the angle at that time are stored as well as the stopped position.

•The stored position will be cleared if the disc tray is opened. Further, if 7 is pressed during playback, “RESUME” will be displayed. If 7 is pressed again, the stored information will be cleared.

•At the time of purchase, Resume is set to ON. Resume can be set to OFF (page 30).

18