JVC CA-MXKA3 Using the Timers, Setting the Clock, Using the Unit, Press the SET button, minute

• If there is a power failure, the clock loses its set- ting immediately. “AM 12:00” blinks on the dis- play and the clock must be reset.

20

Using the Timers

			STANDBY/ON
			SLEEP
			AUX
		FM MODE	FM /AM
CD1	CD2	CD3	CD
REPEAT	PROGRAM /RANDOM
		TAPE	TAPE
		A/B
SOUND			VOLUME
MODE
ACTIVE	SOUND	FADE
BASS EX.	TURBO	MUTING

RM-SMXKA6J REMOTE CONTROL

SLEEP
	¢
CLOCK/TIMER
SET	4

SLEEP indicator REC (Recording) Timer indicator

Timer indicator DAILY Timer indicator

*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

The timers lets you control recording and listening functions auto-		display, the hour digits of the current clock blink on the dis-
matically.		play. )
Three types of timers are available:
	DAILY Timer
	Use this timer to set wake up everyday to music from any
		• If the clock is already set, the display changes as follows
	source, instead of an alarm clock.
	REC (Recording) Timer	each time you press the CLOCK/TIMER button.
	Unattended recording of radio broadcasts. You can set the	TIMER = ON TIME = REC = ON TIME = Clock setting
	starting time and ending time.	display = Canceled = (back to the beginning)
	SLEEP Timer
	Fall asleep and have your System turn off automatically after	2 Press the 4or ¢button to set the hour.
	a certain length of time.
		Pressing the ¢button moves the time forwards and pressing
Setting the Clock		the 4 button moves it backwards. Holding down the button
		moves the hour rapidly.
		3 Press the SET button.
When you plug the AC power cord into the wall outlet, the time in-
dication “AM 12:00” blinks on the display.		The minute digits of the time indication blink on the display.
You can set the clock whether the System is on or off.		• To return to the hour setting, press the CANCEL button.
		4 Press the 4 or ¢ button to set the
		minute.
• The clock must be correctly set for the timers to work.
		5 Press the SET button.
• Each setting step must be completed within approx. two
	minutes. Otherwise, the setting is cleared and must be re-	“CLOCK OK” appears on the display. Then, the selected time
	peated from the beginning.	is set and the seconds start counting from 0.

•The clock may gain or lose one to two minutes per month.

CAUTION:

Using the Unit

1 Press the CLOCK/TIMER button.

The hour digit of the time indication blinks on the display.

•If the clock is already set and “AM 12:00” is not blinking, press the CLOCK/TIMER button repeatedly until clock set- ting display appears on the display. (In the clock setting