Opewting the SELF-CLEANING Oven

(continued)

After Self-Cleaning

You may notice some white ash in the oven. Just wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

If the shelves have become hard to slide, wipe the shelf supports with cooking oil.

NOTE: No functions can be programmed before the door automatically unlocks.

How to Set Delay Start of Cleaning

Quick Reminder:

1.Prepare the oven for cleaning.

2.Close the oven door completely.

3.Press the AUTO SELF CLEAN pad.

4.Press the INCREASE or DECREASE pad until the desired Clean Time appears.

5.Press the STOP TIME pad.

6.Press the INCREASE or DECREASE pad until the desired Stop Time appears in the display.

Delav Start is setting the oven timer to start the clea~ cycle automat~cally at a later time than the present time of day.

NOTE: Before beginning, make sure the oven clock shows the correct time of day.

1. Follow steps to prepare the oven for cleaning.

❑AUTO SELF 2. Press the AUTO SELF CLEAN pad.

CLEAN

n3. Press the INCREASE or DECREASE pad to enter the Clean Time.

/o\

	❑	4. Press the STOP TIME pad.
	❑	“SET STOP TIME” and the
	STOP	“SET STOP TIME” and the
	TIME	earliest Stop Time you can set
	A	will appear in the display.
	A

The earliest Stop Time will be the Clean Time selected plus the time of day. For example: If the Clean Time is 3 hours and the time of day is 6:00, the Stop Time that appears in the display will be 9:00.

5.Press the INCREASE pad to change the Stop Time to a later time of day if desired. For example: If you set Stop Time at 11 :00, the oven will start clean cycle at 8:00 and end at 11 :00. The door latches automatically.

The self-clean cycle will automatically begin after “CLEAN” is displayed and the time for the Clean cycle is set. The words “ON” and “LOCK” will appear in the display when the door automatically locks. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCK light goes off.

6.When the LOCK light is off, open the door.

NOTE:

●During a delayed self-clean operation yoLl can find out when the oven is set to turn on by pressing and holding the AUTO SELF CLEAN pad for 3 seconds.

●A fan may automatically turn on and off to cool internal parts. This is normal and the fan may continue to run even after the oven is turned off.

164D2966P087, JTP55, JTP54 specifications

The GE JTP54 and JTP55 series, with associated part number 164D2966P087, are notable offerings in the realm of jet engine technology, specifically designed for use in various commercial aircraft. These engines exhibit a combination of advanced engineering and reliable performance, making them a popular choice among aircraft manufacturers.

One of the key features of the JTP54 and JTP55 engines is their high-bypass turbofan design, which promotes fuel efficiency while delivering optimal thrust. This turbofan architecture allows for a greater percentage of airflow to bypass the combustion engine core, resulting in reduced fuel consumption and lower emissions. The engines are well-suited for long-haul flights, where fuel efficiency is critical to operating costs.

The JTP54 and JTP55 models leverage a range of advanced materials and technologies to enhance durability and performance. The compressor sections utilize composite fan blades made from lightweight materials, which contribute to improved aerodynamic efficiency. High-temperature super alloys in the turbine sections provide superior resistance to thermal fatigue, allowing the engine to operate effectively under high-stress conditions.

Another notable characteristic of the JTP54 and JTP55 engines is their noise reduction technologies. The application of chevrons on the engine nacelles and the use of advanced acoustic liners minimize the noise generated during operation, making these engines compliant with stringent noise regulations set by aviation authorities. This focus on quiet operation enhances passenger comfort, especially on short-range flights and takeoffs or landings in urban areas.

Connectivity and diagnostic capabilities are also integral to the JTP series. Integrated health management systems monitor engine performance in real time, enabling predictive maintenance strategies that can significantly reduce downtime. This technology allows operators to anticipate potential issues before they become critical, ensuring flight safety and enhancing overall operational efficiency.

In conclusion, the GE JTP54, JTP55, and 164D2966P087 engines epitomize advanced aerospace engineering with their high-bypass turbofan design, utilization of cutting-edge materials, emphasis on noise reduction, and incorporation of smart technologies. These features not only improve operational performance and fuel efficiency but also contribute to a more sustainable and comfortable flying experience. For airlines and operators, choosing the JTP series means investing in a technology that aligns with modern aviation demands for safety, performance, and environmental responsibility.

GE 164D2966P087, JTP54, JTP55 warranty Opewting the SELF-CLEANING Oven, After Self-Cleaning

Models: 164D2966P087 JTP55 JTP54