JW to Set the Oven When Using the Temperature Probe

The display will flash “PROBE” and the oven control will signal if the probe is inserted into the outlet, but the oven is not programmed for the probe.

Your double oven has controls for the upper oven and the lower oven. Be sure to set the correct control. Pads on the left side of the panel are for the upper oven. Pads on the right side of the panel are for the lower oven. The TIMER ON/OFF, COOK TIME, STOP TIME, INCREASE and DECREASE pads can be used for either oven.

1.Insert the probe

into the meat.

2.Plug [he probe into the outlet in the oven. hlake sure it’s pushed all the way in. Close the oven door.

3. Press the PROBE pad,

PROBE

lPPER OVEN

~A

4.Press the INCREASE or DECREASE A pad until the desired internal probe

temperature is displayed.

@

c 5. Press the BAKE pad.

BAKE

A

6. Press the INCREASE or DECREASE pad. The last oven set temperature appears in the display. Continue pressing until the desired oven temperature is displayed.

The oven will start automatically. The words “BAKE ON” and the roasting temperature yOLI set will be in the display.

After a few seconds, the words “LO PROBE” will replace the roasting temperature in the display. After the internal temperature of the meat reaches 100°F.. the changing internal temperature will be

osh wn in the display.

7. When the internal temperature of the

meat reaches the number you have

CLEAR set, the probe and the oven turn off

OFF and the oven control signals. To slop the signal, press the CLEAWOFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on it–they might damage it.

CAUTION: To prevent possible burns, do not unplug the probe from the outlet until the oven has cooled. Do not store the probe in the oven.

NOTE:

If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.

A fan may automatically turn on and off to cool internal parts. This is normal and the fan may continue to run even after the oven is turned off.

You can use the timer even though you cannot use timed oven operations.

To change the oven temperature during the Roast cycle, press the BAKE pad and then the INCREASE or DECREASE pad to get the new temperature.

25

Page 25
Image 25
GE JTP55, JTP54, 164D2966P087 warranty JW to Set the Oven When Using the Temperature Probe

164D2966P087, JTP55, JTP54 specifications

The GE JTP54 and JTP55 series, with associated part number 164D2966P087, are notable offerings in the realm of jet engine technology, specifically designed for use in various commercial aircraft. These engines exhibit a combination of advanced engineering and reliable performance, making them a popular choice among aircraft manufacturers.

One of the key features of the JTP54 and JTP55 engines is their high-bypass turbofan design, which promotes fuel efficiency while delivering optimal thrust. This turbofan architecture allows for a greater percentage of airflow to bypass the combustion engine core, resulting in reduced fuel consumption and lower emissions. The engines are well-suited for long-haul flights, where fuel efficiency is critical to operating costs.

The JTP54 and JTP55 models leverage a range of advanced materials and technologies to enhance durability and performance. The compressor sections utilize composite fan blades made from lightweight materials, which contribute to improved aerodynamic efficiency. High-temperature super alloys in the turbine sections provide superior resistance to thermal fatigue, allowing the engine to operate effectively under high-stress conditions.

Another notable characteristic of the JTP54 and JTP55 engines is their noise reduction technologies. The application of chevrons on the engine nacelles and the use of advanced acoustic liners minimize the noise generated during operation, making these engines compliant with stringent noise regulations set by aviation authorities. This focus on quiet operation enhances passenger comfort, especially on short-range flights and takeoffs or landings in urban areas.

Connectivity and diagnostic capabilities are also integral to the JTP series. Integrated health management systems monitor engine performance in real time, enabling predictive maintenance strategies that can significantly reduce downtime. This technology allows operators to anticipate potential issues before they become critical, ensuring flight safety and enhancing overall operational efficiency.

In conclusion, the GE JTP54, JTP55, and 164D2966P087 engines epitomize advanced aerospace engineering with their high-bypass turbofan design, utilization of cutting-edge materials, emphasis on noise reduction, and incorporation of smart technologies. These features not only improve operational performance and fuel efficiency but also contribute to a more sustainable and comfortable flying experience. For airlines and operators, choosing the JTP series means investing in a technology that aligns with modern aviation demands for safety, performance, and environmental responsibility.