IhlPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

The fiberglass insulation in self-cleaning

ovens gives off a very small amount of carbon monoxide during the cleaning cycle.

Exposure can be minimized by venting with an open window or using a ventilation fan or hood.

When using electrical appliances, basic safety precautions should be followed, including the following:

Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

Use this appliance only for its intended use

as described in this guide.

sure your appliance is properly installed and “- ounded by a qualified technician in accordance with the provided Installation Instructions.

Do not attempt to repair or replace any part of your oven unless it is specifically recommended in this guide. All other servicing should be referred to a qualified technician.

Before performing any service, DISCONNECT THE OVEN POWER SUPPLY AT THE HOUSEHOLD DISTRIBUTION PANEL

BY REMOVING THE FUSE OR SWITCHING OFF THE CIRCUIT BREAKER.

Do not leave children alone< hildren should not be left alone or unattended in an area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

Do not allow anyone to climb, stand or hang on the door. They could damage the oven or cause severe personal injury.

CAUTION: ITEMS OF INTEREST TO CHILDREN SHOULD NOT BE STORED IN

CABINETS ABOVE AN OVEN. CHILDREN ~LIMBING ON THE OVEN TO REACH

‘EMS COULD BE SERIOUSLY INJURED.

Teach children not to play with the controls or any other part of the oven.

Never leave the oven door open when you are not watching the oven.

. Always keep combustible wa~ coverings, curtains or drapes a safe distance from your oven.

Never wear loose-fitting or hanging garments while using the apptiance. Be careful when reaching for items stored in cabinets over the oven. Flammable material could be ignited if brought in contact with hot heating elements and may cause severe burns.

DO NOT STORE OR USE COMBUSTIBLE MATERIALS, GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

Use only dry pot holders—Moist or damp pot holders on hot surfaces may result in burns from steam. Do not let

pot holders touch hot heating elements. Do not use a towel or other bulky cloth. Such cloths can catch fire on a hot heating element.

Always keep dish towels, dish cloths, pot holders and other linens a safe distance from your oven.

c Always keep wooden and plastic utensils and canned food a safe distance away from your oven.

For your safety, never use your appliance for warming or heating the room.

Do not store flammable materials in the oven.

Do not let cooking grease or other flammable materials accumulate in or near the oven.

Be sure the oven is securely installed in a cabinet that is firmly attached to the house structure. Never allow anyone to climb, sit or stand on the oven door.

(continued next page)

3

Page 3
Image 3
GE JTP54, JTP55, 164D2966P087 warranty IhlPORTANT Safety Notice

164D2966P087, JTP55, JTP54 specifications

The GE JTP54 and JTP55 series, with associated part number 164D2966P087, are notable offerings in the realm of jet engine technology, specifically designed for use in various commercial aircraft. These engines exhibit a combination of advanced engineering and reliable performance, making them a popular choice among aircraft manufacturers.

One of the key features of the JTP54 and JTP55 engines is their high-bypass turbofan design, which promotes fuel efficiency while delivering optimal thrust. This turbofan architecture allows for a greater percentage of airflow to bypass the combustion engine core, resulting in reduced fuel consumption and lower emissions. The engines are well-suited for long-haul flights, where fuel efficiency is critical to operating costs.

The JTP54 and JTP55 models leverage a range of advanced materials and technologies to enhance durability and performance. The compressor sections utilize composite fan blades made from lightweight materials, which contribute to improved aerodynamic efficiency. High-temperature super alloys in the turbine sections provide superior resistance to thermal fatigue, allowing the engine to operate effectively under high-stress conditions.

Another notable characteristic of the JTP54 and JTP55 engines is their noise reduction technologies. The application of chevrons on the engine nacelles and the use of advanced acoustic liners minimize the noise generated during operation, making these engines compliant with stringent noise regulations set by aviation authorities. This focus on quiet operation enhances passenger comfort, especially on short-range flights and takeoffs or landings in urban areas.

Connectivity and diagnostic capabilities are also integral to the JTP series. Integrated health management systems monitor engine performance in real time, enabling predictive maintenance strategies that can significantly reduce downtime. This technology allows operators to anticipate potential issues before they become critical, ensuring flight safety and enhancing overall operational efficiency.

In conclusion, the GE JTP54, JTP55, and 164D2966P087 engines epitomize advanced aerospace engineering with their high-bypass turbofan design, utilization of cutting-edge materials, emphasis on noise reduction, and incorporation of smart technologies. These features not only improve operational performance and fuel efficiency but also contribute to a more sustainable and comfortable flying experience. For airlines and operators, choosing the JTP series means investing in a technology that aligns with modern aviation demands for safety, performance, and environmental responsibility.