Playing Back a Portable Audio Device INFO
By using QP Link (Quick Portable Link), you can easily start playing back a portable audio device connected to the LINE IN jack (see page 5).
•Make sure to set the volume of your portable audio device loud enough so that the System can detect the sound signal.
To activate QP Link | Remote |
ONLY | |
|
QP LINK |
|
CLOCK/TIMER | QPLINK ON |
|
QPLINK OFF
(while holding...)
When QP Link is activated, connecting a portable device to the LINE IN jack and starting playback performs the following:
•While listening to another source...
Changes the source to LINE automatically. (If you change from LINE to another source, QP Link will be canceled.)
•While the System is on standby...
Turns on the System and activates the LINE source
automatically (except when the display is turned off).
| MP3 WMA MONO ST TA NEWS INFO A.STBY REC | |
1DISC ALL | QP Link PG PL USB | AHB PRO S.TURBO SLEEP |
GROUP RANDOM | PRGM 3D PHONIC | PRGR. B.S.P. BONUS REC 1 2 3 |
Bubbles appear when
QP Link works.
Playing Back from the PC INFO 
This System is equipped with a USB AUDIO terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC.
When you connect your PC for the first time, follow the procedure below.
•Remember you cannot send any signal or data to your PC from this System.
IMPORTANT
•Always set volume to “VOL MIN” when connecting or disconnecting the other equipment.
How to install the USB drivers
1Turn on your PC and start running WindowsR 98*, WindowsR 98SE*, WindowsR Me*, WindowsR 2000*, or WindowsR XP*.
•If the PC has been turned on, quit all the applications running.
2Select “USB” as the source.
Remote control: | Main unit: |
USB
3Connect the System to the PC using a USB cable (not supplied).
While QP Link plays back the device...
GROUP RANDOM | MP3 WMA MONO ST TA NEWS INFO A.STBY REC | Bubbles disappear | |
PRGM 3D PHONIC | PRGR. B.S.P. BONUS REC 1 2 3 | ||
1DISC ALL | AHB PRO S.TURBO SLEEP |
| |
when the sound signal 
stops or is too weak.
At the front panel
USB cable
PC
•Use “USB series A plug to B plug” cable less than 3 m.
4The USB drivers are installed automatically.
To playback sound on the PC
Refer to the manuals supplied with the sound reproduction application installed in the PC.
•Noise and static electricity may stop the sound through the USB connection. In this case, do the following operations:
–Disconnect and connect the USB cable again
–Restart the music software on your PC
–Turn off and on the System
*MicrosoftR, WindowsR 98, WindowsR 98SE, WindowsR Me, WindowsR 2000 and WindowsR XP are registered trademarks of Microsoft corporation.
11