For JPEG files playback...

It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.)

This System can play only baseline JPEG files*. Progressive JPEG files* or lossless JPEG files* cannot be played.

*Baseline JPEG format: Used for digital cameras, web, etc.

Progressive JPEG format: Used for web.

Lossless JPEG format: An old type and rarely used now.

This System can playback JPEG files with the extension code <.jpg> or <.jpeg> (regardless of the letter case— upper/lower).

This System may not playback JPEG files properly if they are recorded on a device other than a digital still camera.

During slide-show playback, zoom cannot be operated.

For MPEG-1/MPEG-2 playback...

The stream format should conform to MPEG system/ program stream.

720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is recommended for the highest resolution.

This System also supports the resolutions of 352 x 576/ 480 x 576/ 352 x 288 pixels (25 fps) and 352 x 480/ 480 x 480/ 352 x 240 pixels (30 fps).

The file format should be MP@ML (Main Profile at Main Level)/SP@ML (Simple profile at Main Level)/ MP@LL (Main Profile at Low Level).

Audio streams should conform to MPEG1 Audio layer-2 or MPEG2 Audio Layer-2.

For ASF playback...

This System can play back ASF files with the extension code <.asf> (regardless of the letter case—upper/lower).

This System supports ASF files whose resolution is 352 x 288 pixels or less.

Some recorded files may not be able to playback depending on file characteristics, kind of digital camera/ video camera, or recording conditions.

You cannot use the following functions—One Touch Replay, Slow motion, A-B Repeat, Program Play and Random Play.

For DivX playback...

This System can play only a disc of UDF-Bridge format. “Multi-border” is not supported.

The System supports DivX files whose resolution is 720 x 480 pixels or less (30 fps), and 720 x 576 pixels or less (25 fps).

Audio stream should conform to MPEG1 Audio Layer-2 or MPEG Audio Layer-3 (MP3).

This System can play back DivX files with the extension code <.divx> <.div> <.avi> (regardless of the letter case—upper/lower).

The System does not support GMC (Global Motion Compression).

The file encoded in the interlaced scanning mode may not be played back correctly.

You cannot use the following functions—One Touch Replay, Slow motion, A-B Repeat, Program Play, Random Play and on-screen operations.

Playing Back a Portable Audio Device:

When QP Link fails due to a weak sound signal from the LINE IN jack, Auto Standby may turn the System off even if you can hear the sound from the speakers.

In such cases, adjust the volume level of the component louder so that the System can detect the sound signal properly.

Changing from LINE to another source while QP Link works will deactivate QP Link temporarily.

In this case, the following reactivates QP Link:

Pressing QP LINK on the remote control.

Unplugging the component from the LINE IN jack, then plugging it again.

If you press STANDBY to turn the System off or if preset Timer turns the System off while QP Link works, the System will deactivate QP Link temporarily.

In such cases, the following reactivates QP Link:

When no sound signal comes from the LINE IN jack for about 30 seconds after the System is turned off.

When you turn on the power again.

QP Link may start working when you just plug in the component to the LINE IN jack or unplug it. This is not a malfunction.

35