Troubleshooting
General:
Adjustments or settings are suddenly canceled before you finish.]There is a time limit. Repeat procedure again.Operations are disabled.]The
]The path between the remote control and the remote sensor on the System is blocked.
]The batteries are exhausted.No sound is heard.]Speaker connections are incorrect or loose.]Headphones are connected.No picture appears on the screen.]The video cord connections are incorrect or loose.No picture is displayed on the TV screen, the picture is blurred, or the picture is divided into two parts.
]The System is connected to a TV which does not support progressive video input.
The left and right edges of the picture are missing on the screen.]Select “4:3 LB” for “MONITOR TYPE” (see page 32).Radio Operations:
Hard to hear broadcasts because of noise.]Antennas connections are incorrect or loose.]The AM loop antenna is too close to the System.]The FM antenna is not properly extended and positioned.Disc Playback Operations:
The disc does not play.]You have inserted a disc whose Region Code is not “2.”(“REGION ERR” appears on the display.)]The disc is placed upside down. Place the disc with the label side up.ID3 Tag on an MP3/WMA disc cannot be shown.]There are two types of ID3
]The playing order is determined when the groups and tracks were recorded. It depends on the writing application.
]The disc may include different types of tracks (MP3/ WMA files, JPEG files and
]You have changed the “FILE TYPE” setting after the System read the disc. In this case, reload the disc.
“NO AUDIO” appears.]This System cannot playback illegally produced DVD Audio discs.“LR ONLY” appears.]Some DVD Audio discs prohibit downmixed output. When you playback such a disc, this System plays back the left front and right front signals only.
The disc sound is discontinuous.]The disc is scratched or dirty.No subtitle appears on the display though you have selected the initial subtitle language.
]Some DVDs are programmed to always display no subtitle initially. If this happens, press SUBTITLE after starting playback (see page 19).
Audio language is different from the one you have selected as the initial audio language.
]Some DVDs are programmed to always use the original language initially. If this happens, press AUDIO/MPX after starting playback (see page 18).
The disc tray does not open or close.]The AC power cord is not plugged in.]Child Lock is in use. “LOCKED” appears in the display window (see page 23).USB Operations:
Unable to playback through the USB connection.]USB connection and setting is incorrect.Playback stops.]Disconnect and connect the USB cable again.]Restart the music software on your PC.]Turn off and on the System.Timer Operations:
Daily Timer does not work.]The System has been turned on when the
]Title/group number and chapter/track number are not entered while setting the Daily Timer. Do not skip these steps when you want to play a disc using Daily Timer.
38