⁄Digital audio component

Protective cap

•Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 33). If the setting is incorrect, loud noise may be generated causing damage to the speakers.

•Digital audio signals are output from this System only when “DVD/CD” is selected as the source.

@Speakers

When connecting a portable audio device (LINE)Portable audio device (Digital Audio Player, etc.)

At the front panel

To the audio output

Stereo mini plug

(not supplied)

To the audio inputPortable audio device with the audio input(Digital Audio Player, etc.)

•When connecting the speaker cords, match the polarity of the speaker terminals: red color to (+) and black color to (–).

Press and hold

•By using QP Link (Quick Portable Link), you can easily start playing back a portable audio device on this unit when connecting it to the LINE IN jack. See page 11 for details.

•Connect an audio component to the LINE OUT jack if the component is not equipped with a digital input terminal.

•If an external device is not equipped with a stereo mini plug audio output, use a plug adaptor to convert the stereo mini plug to the corresponding plug of the audio output.

InsertRelease

Red

From right

CAUTION:

BlackFrom left
speaker

 

speaker

 

 

•DO NOT connect more than one speaker to each terminal.

• DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.

Preparing the remote control

R6(SUM-3)/AA(15F)

•Dispose of batteries in the proper manner, according to federal, state, and local regulations.

DO NOT recharge, short, disassemble, heat the battery or dispose of it in a fire.

When using the remote control

Point the top of the remote control toward the remote sensor as directly as possible. If you operate it from a diagonal position, the operating range (approx. 5 m) may be shorter.

5