~Powered subwoofer
From the powered | SUB - |
subwoofer | WOOFER |
OUT |
(not supplied)
The subwoofer connected can reproduce the bass sounds recorded in front left and right channels, but cannot reproduce the LFE signals in DVD
•Before plugging the unit to the main supply, make sure that the powered subwoofer is turned off.
ŸAM/FM antenna
To assemble the AM loop antennaAM loop antenna (supplied)
Keep it connected.
Extend it horizontally.
FM outdoor antenna (not supplied)
AM loop antenna (supplied)
FM antenna (supplied)
Extend it so that you can obtain the best reception.
•Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector (IEC or DIN45325).
!TV/monitor
Connect only component cord or Scart cord at one time.Red
Blue
Green | Component video cord |
| (not supplied) |
•To select progressive scanning mode (see page 14), use COMPONENT jacks.
• This connection sends the video signal (Composite, RGB or Y/C) and receives audio signal from TV. To listen to the TV sound, see page 8.
Scart cord (not supplied)
•After connecting a TV, select the proper video signal mode according to the connection method. See “Changing the Scanning Mode” on page 14.
4