JVC SR-HD2500US manual On-screen Displays, Status display, SDI time code display, Event display

Getting Started

On-screen Displays

Status display

Displays the current settings and operating status (such as playback, pause) of this unit.

Pressing the [ON SCREEN] button on the remote control displays the status. To cancel the display, press the [ON SCREEN] button again.

You can select whether to display the statuses by changing the settings in the settings menu.

For more details, refer to “DISPLAY” (A page 83) .

SDI time code display

The time code is displayed during recording of SDI input signals.

You can specify whether to display the time code, and also where to display it.

For details, refer to “TIME CODE INPUT SETTING” and “TIME CODE DISPLAY POSITION” under “SDI

CONNECTION”.

Memo:

⬤When “TIME CODE INPUT SETTING” of “SDI CONNECTION” is set to “OFF”, the time code is not displayed.

Memo:

⬤To display the statuses, set the ON SCREEN GUIDE item on the DISPLAY menu screen to “AUTO”.

⬤Setting the DISPLAY item to “OFF” hides display of all status information.

⬤You can display the status by pressing the [OPTION] button on the remote control unit when playback, dubbing or editing is not in progress.

①Press the [OPTION] button on the remote control unit

②Select “ON-SCREEN DISPLAY”, and press the [OK] button on the remote control unit

Event display

An on-screen event display appears on the display window as well as the monitor when there is a misoperation.

⬤The event display appears for an interval of about three seconds.

Memo:

⬤The same event display may appear several times.

Alarm display

When an operation is not accepted by this unit, an on-screen alarm display appears on the display of the main unit as well as the monitor.

12