JVC SR-HD2500US manual Digital OUT, DV in Audio Setting, BD MIX Sound

Settings Menu

⬛DIGITAL OUT

Set this item according to the device connected to the digital audio output terminal (optical digital).

⬤PCM DOWN SAMPLING

For specifying settings on sampling frequency conversion.

Setting	Description
Values
OFF	Sampling frequency is not converted.
ON	Audio recorded at a sampling frequency of
	96 kHz or 88.2 kHz is converted to 48 kHz
	and 44.1 kHz respectively.

Memo:

⬤Setting to “OFF” may produce the same effects as the “ON” mode for some discs.

⬤Dolby Digital

For setting audio output to “BITSTREAM” or “PCM”.

Setting Values	Description
BITSTREAM	Use this setting when connecting a
	device that is able to decode “Dolby
	Digital”.
PCM	Audio input will be changed and output as
	“PCM”.
	Use this setting when connecting a
	device that is unable to decode “Dolby
	Digital”.

⬤Dolby Digital Plus/TrueHD

For setting audio output to “BITSTREAM” or “PCM”.

Setting	Description
Values
BITSTREAM	Use this setting when connecting a
	device that is able to decode “Dolby
	Digital Plus/TrueHD”.
PCM	Audio input will be changed and output as
	“PCM”.
	Use this setting when connecting a
	device that is unable to decode “Dolby
	Digital Plus/TrueHD”.

⬤DTS

For setting audio output to “BITSTREAM” or “PCM”.

Setting Values	Description
BITSTREAM	Use this setting when connecting a
	device that is able to decode “DTS”.
PCM	Audio input will be changed and output as
	“PCM”.
	Use this setting when connecting a
	device that is unable to decode “DTS”.

⬤DTS-HD

For setting audio output to “BITSTREAM” or “PCM”.

Setting Values	Description
BITSTREAM	Use this setting when connecting a
	device that is able to decode “DTS-HD”.
PCM	Audio input will be changed and output as
	“PCM”.
	Use this setting when connecting a device
	that is unable to decode “DTS-HD”.

⬤ AAC

For setting audio output to “BITSTREAM” or “PCM”.

Setting Values	Description
BITSTREAM	Use this setting when connecting a
	device that is able to decode “AAC”.
PCM	Audio input will be changed and output as
	“PCM”.
	Use this setting when connecting a
	device that is unable to decode “AAC”.

Memo:

⬤Audio sound may not be properly played back if the audio equipment in use does not support “BITSTREAM” output. In this case, set to “PCM”.

⬛DV IN AUDIO SETTING

For changing the audio recording settings during DV input.

Setting Values	Description
STEREO 1	Records the audio sound during video
	recording (L1, R1).
STEREO 2	Records audio sound that is added later
	(L2, R2), such as during editing.
MIX	Records “STEREO 1” and “STEREO 2”
	sounds.

⬛BD MIX SOUND

For setting a mixture of BD video secondary audio and operation sounds output.

Setting	Description
Values
OFF	Outputs main audio only.
ON	Outputs a mixture of BD video secondary
	audio and operation sounds during playback
	of BD-Videos that contain BD video
	secondary audio and menu operation
	sounds.

Memo:

⬤Output is converted to Dolby Digital or DTS according to the main audio when the “DIGITAL OUT” item is set to “BITSTREAM”.

82