| Tape Dubbing (From VCR To DVD) | 1 For DVD deck | ||
| ||||
| Load a recordable disc. | |||
|
|
| For VCR deck | |
| Dubbing An Entire Cassette | ||||
Load a cassette you want to dub. | ||||
|
|
| 2 Press VCR/DVD repeatedly so that the DVD lamp lights up on | |
Because this unit includes both DVD deck and VCR deck, you can | ||||
easily use this unit for dubbing without connecting any other | the unit. | |||
3 Press REC MODE repeatedly to set the recording mode. | ||||
equipment. | ||||
|
|
| 4 Press VCR] to select the dubbing direction. | |
● Turn on the unit. | ||||
● “VCR]” lights up on the unit. | ||||
● Turn on the TV and select the video channel (or AV mode). | ||||
5 Press and hold DUBBING for more than 2 seconds to start | ||||
● Slide the TV/CABLE/DBS/DVD switch to DVD. | ||||
|
|
| dubbing. | |
|
|
| ||
VCR ]
VCR/DVD |
| 8 | DUBBING |
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 |
|
| 0 |
|
|
8
REC MODE
●If the tape has not been rewound, the VCR deck rewinds the tape automatically. When the VCR deck has finished rewinding, dubbing begins automatically.
●After dubbing is completed, the VCR deck rewinds the tape automatically and the unit shuts off.
●To stop dubbing, press 8.
NOTES:
●If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to dub. It is recommended to conduct a test with unimportant cassettes first.
●The superimposed indication during the operation or dubbing is not recorded.
●It is not possible to dub a tape with a copy protection signal.
●If the recording capacity of disc become full, the tape stops automatically.
●It is not possible to perform other operations like Live Memory Playback. Check the recorded program on the disc after dubbing.
●Dubbing is not possible on the discs used exclusively for
●If the index code is found on a tape, a single title is created. While creating a title, the dubbing stops and then starts again.
●When dubbing can not be performed properly, set “BLUE BACK” to “OFF”. ( pg. 76)