JVC SR-VS20U manual Access Mode SET Screen, Select Superimpose SET

Superimpose

This function, switchable between ON and OFF, determines whether or not operational indicators will appear on screen.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS MODE SET
2	SCREEN
	Move the highlight bar (arrow) to "MODE SET" by
	pressing %Þ, then press OK or #.
	SELECT SUPERIMPOSE SET
3	MODE
	Move the highlight bar	MODE SET
	(arrow) to "SUPERIMPOSE"	REAR AUX INPUT	VIDEO
	by pressing %Þ, then press	OUTPUT1	AUTO
		2ND AUDIO RECORD	OFF
	OK or #to select the	AUTO TIMER	OFF
	desired mode:	=SUPERIMPOSE	ON
	a– Select "ON" if you want
	the superimposed	SELECT WITH (5,°) AND (OK)
	operational indications	PRESS (MENU) TO END
	on the TV screen.
	b– Select "OFF" if you do not want the superimposed
	operational indications on the screen.
	RETURN TO NORMAL
4	SCREEN
	Press MENU.

EN27

T	2	W
1		3

2

4 5 6

7 8 9

0 4

1 DV S-VHS

MENUOK

To recall an indication

1Press OSD.

■All indications corresponding to the current status are displayed for 5 seconds. After that, the counter information and RECORD/PAUSE if in the Record Pause mode, are left displayed on the screen.

2Press OSD again to clear the display.

■The RECORD/PAUSE indication is left displayed on the screen.

NOTES:

●If you engage the Record Pause mode, RECORD/PAUSE is displayed regardless of the Superimpose mode setting.

●If you select a channel on which no signal is received, the channel number is displayed regardless of the Superimpose mode setting.

The superimposed indication on the TV screen tells you what the VCR is doing.

1			7
2	CH	125		RECORD			8
3	THU 12:00 AM				PAUSE
	STEREO			] SP			9
4	SAP	S-VHS ET : 0N					11
5	VHS
		+	+	+				12
	B					E
6				INDEX-1			13
	NORM						14
	HI–FI	COUNT		–1:23:45

VHS

1– Tuned-in channel or AUX(iliary) mode

When the channel is changed, the new channel is displayed on the screen for 5 seconds.

Dubbing Direction (DV → VHS/VHS → DV) indication 2– Clock time

3– Stereo program indication

4– Second Audio Program indication 5– VHS/DV indicator

6– Audio mode indications 7– "Cassette Loaded" mark

When a cassette is loaded, the mark is displayed for 5 seconds. It blinks when the VCR's EJECT button is pushed.

8– Operation mode

When the operation mode is changed, the new mode is displayed — RECORD (5 sec.), PLAY (5 sec.), FF/REW (5 sec. when engaged from Stop mode), RECORD PAUSE (for as long as Pause is engaged), and ITR *:** (5 sec.).

1		7
2	CH	125	RECORD	8
3	THU 12:00 AM		PAUSE
	STEREO		] SP	9
4	SAP	ERROR	12BIT	10
5	DV
				11
6	L + R	COUNT	0:00:00	15
		DV

9– Tape speed indication 10– Sound Mode indicator (DV) 11– S-VHS ET indication (VHS)

ERROR indication (DV)

12– Tape position indicator (VHS) 13– INDEX indication (VHS)

14– Counter reading (VHS)

Switchable to the tape remaining time display

15– Time Code (DV)