JVC SR-VS20U manual Express Timer, SET Program Stop Time, SET Program Date, SET Channel Number

44ENTIMERRECORDING (cont.)

	You can directly program the VCR’s timer to record up to 6
Express Timer
	shows each on the VHS and DV decks, as far as a year in
	advance. Remember, the clock must be set before you can
Programming	program the timer ( pg. 8 or 10).
		Insert a VHS (or S-VHS) cassette with the record safety
		LOAD A CASSETTE
		tab intact, or a Mini DV cassette with the erase
	1 protection switch set to "REC".
Turn on the TV and select the AV mode.		● The VCR comes on, and the counter is reset,
		automatically.
		● Select the recording deck by pressing S-VHSor DV.

		ACCESS VCR PLUS+
	S	SCREEN
DV	-VHS	2 Press PROG..
		ACCESS PROGRAM
		SCREEN

	3	Press START +/–. (If you’re	VHS PROGRAM 1
		just starting out,	START	STOP
		“PROGRAM 1” appears.)
			– –:– –AM	= – –:– –AM
			DATE	CH
			– –/– –/– –	– – – SP
			PRESS (+/–, SP/EP, 8=DAILY,
			9=WEEKLY), THEN (0K)
			PRESS (PROG.) TO END
1	2 3	SET PROGRAM START TIME
T	W

		2
4	5	6

	7	8	9
	DATE+/
	–	0	4
			CH+/–
START+/–			S-VHS
PROG.
	1	DV	S-VHS
		–

4

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to move in 30- minute increments, or press and release repeatedly to move 1 minute at a time.

VHS PROGRAM 1

START		STOP
8:00 AM	=	– –:– –AM
DATE		CH
– –/– –/– –		– – –	SP

PRESS (+/–, SP/EP, 8=DAILY,

9=WEEKLY), THEN (0K) PRESS (PROG.) TO END

STOP+/	DV
3

5

SET PROGRAM STOP TIME

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

6

7

SET PROGRAM DATE

Press DATE +/–. (The current date is displayed on screen. The date you enter appears in its place.)

SET CHANNEL NUMBER

Press CH +/–.

●If you are using a DBS receiver, see "ATTENTION FOR DBS RECEIVER USERS" on next page.

●Holding down CH +/– rapidly scans through the channels.