JVC SR-VS20U manual Confirm Overlapping, Programmes, Select Programme to, Modify

When programmes overlap each other

If "PROGRAM NOT COMPLETED PROGRAM OVERLAP" appears, you have another programme overlapping the programme you have just made.

The Program Check screen appears and conflicting programmes will start blinking.

	VHS
PROGRAM NOT COMPLETED	PR START		STOP	CH	DATE
	1	8:00P	11:00	12	12/24
PROGRAM OVERLAP	2	10:00A	10:45	40	12/25
	3	11:30P	1:00	125	12/25
	4	9:00P	10:00	10	12/24
	5
	6
	DV
	(5,∞), THEN (3) (PROG.) : END

EX. Programme 1 (you have just made) and Programme 4 overlap each other on the VHS deck.

CONFIRM OVERLAPPING

PROGRAMMES

1 Overlapping programmes blink on the screen.

SELECT PROGRAMME TO

EN47

ATTENTION

If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.

Pattern 1: The program with the lower program number will be recorded.

10:00	11:00	12:00
Program 1	CH10
Program 2			Not recorded
	CH40

Pattern 2: The program that is broadcast earlier will be recorded.

10:00	11:00	12:00
Program 1	CH10
Program 2			Not recorded
	CH40

Pattern 3: The program that is broadcast earlier will be recorded, followed by the remaining portion of the other program.

10:00	11:00	12:00
Program 1	CH10
	Program 2
			CH40

Not recorded

2	MODIFY
	Press %fi, then press OK or #.
	● You can only select one of the overlapping
	programmes.
	NOTE:
	If you do not mind this overlap, press PROG to finish
	the timer programme setting. See “ATTENTION” to the
	right. Without doing anything for about 1 minute, the
	VCR will finish the timer programing.
	CANCEL OR CHANGE
	PROGRAMME SETTING
	To cancel a programme,	VHS PROGRAM 4
	press CANCEL when the
3 Program screen you do not		START		STOP
		9:00 PM		= 10:00PM
	want is shown. "PRO-	DATE		CH
	GRAM COMPLETED"
		12/24/00		10 SP
	appears on the TV screen	SUN
	for about 5 seconds, then	PRESS (CANCEL) TO CANCEL
	normal screen appears.	PRESS (OK) TO CONFIRM
		PRESS (PROG.) TO END
	To change a programme,
	press the appropriate button: START+/–, STOP+/–,
	DATE +/–,CH +/– and/or SP/EP (		) when the
	Program screen on which you want to make changes is
	shown, then press OK.
	"PROGRAM COMPLETED" appears on the TV screen
	for about 5 seconds, then normal screen appears.

NOTE:

If the overlap is not yet solved or another overlap occurs with the timer programme setting after making the last correction on a programme, the conflicting programmes will be shown on the Program Check screen again. Repeat the above steps again until the overlap is solved.

NOTE:

If the programme you have just made and "DV" are blinking, there is a conflicting programme1 on the DV deck.

Press %fi to move the highlight bar to "DV", then press OK or #.

DV Programme Check

2screen appears. Cancel or change programme setting as described in step 2 and 3 in the left column.

VHS
PR START		STOP	CH	DATE
1	8:00P	11:00	12	12/24
2	10:00A	10:45	40	12/25
3	11:30P	1:00	125	12/25
4	9:00P	10:00	10	12/24
5
6

DV

(5,∞), THEN (3) (PROG.) : END

DV
PR START		STOP	CH	DATE
1	9:00P	10:00	12	12/24

2

3

4

5

6 VHS

(5,∞), THEN (3) (PROG.) : END