Assembly (continued)
Joining the leg and the speaker unit
6 Insert the speaker cord into the speaker terminal inside the leg.
1Press and hold the clamp.
2Insert the exposed core of the speaker cord fully into the terminal.
•Connect the cord with black stripe to the · terminal.
3Release your finger.
1 2 3
7 Join the speaker section and the leg.
Insert the speaker section to the leg, then fix the speaker section and the leg with one of the washers and one of the supplied screws (short: M5 x 12 mm).
Speaker section
Joint here
Push cords fullywithout gap. inside the leg before
attaching the speaker section.
Leg | Screw |
Washer
Repeat the procedure from step 1 to assemble the other satellite speakers.
Leg Speaker
section
The cord with the black stripe.
For disassembly:
Reverse Assembly procedure:
