To let recording pause temporarily:
Press REC PAUSE. The tape indicator stops blinking and lights steadily.
Press Û or Ü to resume recording.
To record continuously on both sides of tape:
1Load a tape so that you can start recording from the £ direction.
2Press REVERSE MODE to switch the reverse mode on.
Press so that the reverse mode indicator (¹) lights up.
3Prepare recording of the associated components.
4 Press REC PAUSE.
5 Press Ü to start recording.
•The recording in the reverse mode stops after completing recording in the ª direction. Be sure to start recording from the £ direction.
•When the reverse mode is switched off, recording stops after having recorded onto one side of tape.
Note: The side erasure tab is removed (refer to P.19) will not be recorded even though the reverse mode is swithed on.
To record audio using Dolby NR
The Dolby NR is used to record audio to reduce hiss noise when the tape is played back later. The Dolby NR includes type B for popular use and type C for even improved noise reduction effect.
Press DOLBY NR so that either the B or C indicator lights up.
DOLBY B NR |
| DOLBY C NR |
| ||
(Indicator lit) |
| (Indicator lit) |
Off (Canceled) 
•A tape recorded using Dolby NR should be played back using the Dolby NR of the same type as that used in recording. The audio quality will be affected if a different type is used in playback.
13
