INTRODUCTION
Thank you for purchasing a JVC product. Read this instruction book carefully before operating to be sure of getting optimum performance and longer service life from the unit.
CONTENTS |
|
Features | 3 |
Cautions | 3 |
Connections | 5 |
Cassette loading | 5 |
Names of parts and their functions | 6 |
Auto reverse operation | 7 |
Playback | 7 |
Recording | 8 |
Compu link control system | 9 |
Dubbing | 10 |
Maintenance | 11 |
Troubleshooting | 11 |
Specifications | Back cover |
FEATURES
1.Double cassette mechanism for recording/playback and playback
Recording/playback mechanism in deck B and playback mechanism in deck A both with reverse head system.
2.Full logic mechanism
3.Dolby* HX PRO headroom extension
4.Dolby B & C noise reduction system
5.DDRP (Dynamics Detection Recording Processor) com- patibility
The DDRP function is possible only when used with a suit- able JVC CD player.
6.2-color FL peak level indicator
7.Digital tape counter respectively for deck A and deck B
8.Synchro start (normal-/high-speed) dubbing
9.Auto tape select mechanism (decks A and B)
10.COMPU LINK-3 compatible
*Dolby noise reduction and HX Pro headroom extension manufactured under license from Dolby Laboratories Licensing Corporation. HX Pro originated by Bang & Olufsen.
``DOLBY'', the 
and ``HX PRO'' are trade- marks of Dolby Laboratories Licensing Corporation.
COMPU LINK control system is the convenient system using COMPU
CAUTIONS
1.Prevention of Electric Shocks, Fire Hazards and Damage
1)Even when the POWER switch is set to STANDBY, a very small current will flow. To save power and for safety when not using the unit for an extended period of time, disconnect the power cord from the household AC outlet. (for the J ver- sion)
Set the 
POWER switch to the OFF position when not in use. (for the B version)
2)Do not handle the power cord with wet hands.
3)When unplugging from the wall outlet, always grasp and pull the plug, not the power cord.
4)Consult your nearest dealer when damage, disconnection, or contact failure is found with the cord.
5)Do not bend the cord sharply, or pull or twist it.
6)Do not modify the power cord in any manner.
7)Do not remove screws to disassemble the unit and do not touch anything inside the unit.
8)AC power cord (For the J version only)
The AC power cord of this unit has certain
Fig. 1
(For CANADA) CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
(Pour le CANADA) ATTENTION
POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.
9)Do not insert any metallic objects into the unit.
10)Unplug the power cord when there is a possibility of light- ning.
11)If water gets inside the unit, unplug the power cord from the outlet and consult your dealer.
12)Do not block the ventilation holes of the unit so that heat can escape. Do not install the unit in a badly ventilated place.
13)Be sure to unplug the power cord from the outlet when going out or when the unit is not in use for an extended period of time.
This product can be combinated with a DDRP (DYNAMICS DETECTION RECORDING PROCESSOR) system (compact disc player + cassette deck, etc.) to enable setting the opti- mum recording level automatically. Refer to these instruc- tions for details.
± 3 ±
