CONNECTIONS
·Do not switch the power on until all the connections are com- pleted.
·Insert the plugs firmly, or poor contact will result, causing noise.
·When the
·When using the Compu Link Control System version 3, do not connect the power cord to the SWITCHED AC OUTLET of an
amplifier or receiver. In the B version, turn the deck 
POWER switch ON. Otherwise, the automatic power on/
STANDBY function cannot be carried out.
1.Connection to a stereo amplifier Note:
When installing the deck, be sure to install at a distance from your amplifier. If they are stacked, noise (hum) may occur.
Deck
Remote cable (provided with CD player)
CD player
2. Remote cable connection for COMPU LINK
·By connecting a remote cable, COMPU LINK functions (auto- matic power on/STANDBY, automatic source selection, syn- chronized recording and DDRP recording) can be performed. In this time the provided
·When making synchronized recording with a CD player, con- nect the remote cable to the COMPU
Notes:
1.When making synchronized recordings, only a single deck should be connected to the amplifier.
2.If a component is not a JVC COMPU LINK component, bypass it when making the remote cable connections.
3.This deck can be connected with an amplifier and a CD player which have the COMPU
Stereo amplifier
Remote cable (provided)
CASSETTE LOADING
1.Press the 
(eject) button to open the cassette holder.
2.Load a cassette as shown.
3.Press the cassette holder to close it. Be sure to obtain the click sound to close the holder securely.
Notes for the B version:
·If the 
POWER switch is set to OFF while the tape is mov- ing, you might not be able to remove the cassette. If this hap- pens, switch the power on again before attempting to remove the cassette.
·Setting the 
POWER switch to OFF during playback or recording may cause a malfunction. Always stop playback before setting the 
POWER switch to OFF.
A
Load the cassette with the
AUTO REVERSE
± 5 ±
