Playback

•The icon such as shows the disc formats or file types the operation is available for.

IMPORTANT

Before using the remote control for the following operation;

1 Set the remote control mode selector to AUDIO.

2 Press DVD or USB MEMORY.

The buttons described below are used on pages 17 to 21.

Number buttons

Remote control mode selector

Cursor (3/2/Y/5)/

ENTER

(play button)

Basic playback

7 To play a disc1 Press the desired DISC (1-5)0 on the center unit.

• The system turns on and the disc tray comes out.

2 Place a disc.

Label side up

When placing an 8 cm disc

3 Press DISC (1-5), with SHIFT pressed.

NOTE

•Up to 5 discs can be loaded.

•You can also start playback by pressing 3 (play button) or DVD.

•The system plays back available discs sequentially until you stop playback or until the disc loaded on the DISC 5 tray reaches to the end. However, when DVD VIDEO or DVD AUDIO is loaded in the system, playback of the disc next to the DVD VIDEO or DVD AUDIO will not start.

7To play a file in a USB mass storage class devicePress USB MEMORY.

The operations of the files in a USB mass storage class device depend on the file types stored in the device.

For MP3/WMA files

The file control display (see page 26) appears on the TV screen.

For JPEG files

Each file (still pictures) is shown on the TV screen for about 3 seconds (slide-show). When stopping playback, the file control display (see page 26) appears on the TV screen.

For ASF/MPEG-2/MPEG-1 files

Pressing TOP MENU/PG or MENU/PL shows the file control display (see page 26) on the TV screen during playback.

For DivX files

During the readout time, “READING INDEX” may appear on the TV screen.

Pressing TOP MENU/PG or MENU/PL shows the file control display (see page 26) on the TV screen during playback.

NOTE

•When several types of files are recorded on a disc/device, select appropriate file type on the set up menu. (See page 34.)

7To pause playback

Press 8.

To continue playback, press 3 (play button).

7To stop

Press 7.

NOTE

•(For JPEG) The system cannot accept operations even though you press any buttons before the entire picture appears on the TV screen.

17