Setting DVD preferences
You can set the output level of the subwoofer in the
The signals below the preset frequency level will be sent to and be reproduced by the subwoofer.
Select one of the crossover frequency levels according to the size of the small speaker connected.
•120Hz: Select when the cone speaker unit built in the speaker is about 8 cm.
•150Hz: Select when the cone speaker unit built in the speaker is about 6 cm.
•200Hz: Select when the cone speaker unit built in the speaker is about 5 cm.
You can activate or deactivate Resume Playback function. (See page 27.)
7ON SCREEN GUIDEYou can activate or deactivate the
The system has its own Registration Code for DivX playback. You can confirm the code of your system.
•Once you play back a disc created by using the Registration Code, the system’s code is overwritten by a totally different new one for copyright protection purpose.
Tuner operations
IMPORTANT
Before using the remote control for the following operation;
1Set the remote control mode selector to
AUDIO.
2Press FM/AM.
The buttons described below are used on pages 35 and 36.Number
buttons
Remote control mode selector
Cursor (3/2)
Manual tuning
On the remote control:
1 Press FM/AM repeatedly to select the band.Example:
When the system is tuned in to 810 kHz.
2 Press TUNING 9/( repeatedly until you find the frequency you want.When you hold down the button until the system starts searching for stations and then release it, the system stops searching automatically when a station of sufficient signal strength is tuned in to.
On the center unit:
1 Press SOURCE repeatedly to select the band (FM or AM).2 Press TUNING +/– repeatedly until you find the frequency you want.NOTE
•When an FM stereo program is received, the ST indicator lights on the display window.
35