JVC Connecting external components, Connecting the AC power cord, Connection using the component video jacks, Connection using the scart connector, Red, 13), DVD

Connection using the component video jacks

From component	Green
video input
TV
Component video	Blue

Do not connect the power cord until all other connections have been made.

Video connectionComposite video cord

(not supplied)

VCR,etc.orS-video cord (not supplied)

cord (not supplied)

A From composite video output

Align the

Red

B From S-video output

5 marks.

If your TV does not support progressive video input, connect a TV via the AV (scart) connector (see below).

For the BNC connection, use a plug adapter (not supplied).

Connection using the scart connector

To view a video from the external component connected as above:–Connect a TV via the AV (scart) connector (see the left column).–Select an appropriate video input settingaccording to the video connection. ( 13)Audio connectionConnecting a digital component

TV

Scart cable (not supplied)

Digital optical cable (not supplied)

STB (Set Top	From digital optical output
Box), etc.

To scart connector*

*Some TVs’ scart connectors emit audio signals. In such a case, you can enjoy the TV sound through this System by

selecting TV SOUND as the source to play. ( 10)No sound signal comes out from the AV (scart) connector.

Connecting external components

,

Select “OPT” as the audio input setting beforeplaying back. ( 13)Connecting an analog component

	RCA pin plug cord
VCR, etc.	(not supplied)
	From audio output

Select “2CH” as the audio input setting before

playing back. ( 13)

	Connecting the AC power cord
Select “VIDEO” as the source (	10) for playing Plug in the System only after all other connections have
a component connected as follows.	been completed.

Available video output terminals for each source			√: Available —: Not available
Source	DVD	IPod	VIDEO
Terminal	USB
HDMI	√	—	—
COMPONENT	√	—	—
AV (scart)	√	√	√
		(Composite signal only)	(Composite signal only)

8