Underlined items are the initial settings.

Audio menu (AUDIO)

DOWN MIX

This menu is available only when the speaker position mode is set to “S.SPK F” (

11).

 

Select the audio signal output to the TV connected to the HDMI MONITOR OUT terminal.

 

DOLBY SURROUND: For the TV equipped with Dolby Pro Logic decoder

 

 

STEREO: For ordinary TV

 

 

 

D. RANGE

You can enjoy powerful audio even at low volume level while playing Dolby Digital software.

COMPRESSION

AUTO: Select this to apply the compression only to the multi-channel software (except 1-

 

channel and 2-channel sources).

 

 

ON: Select this to always apply the compression.

 

HDMI AUDIO OUT This setting is effective only for the source “DVD” or “USB.”

Select whether the System emits the audio signal from the HDMI MONITOR OUT terminal (ON) or not (OFF).

Other setting menu (OTHERS)

RESUME

Activate (ON) or deactivate (OFF) the resume function.

ON SCREEN GUIDE Activate (ON) or deactivate (OFF) the on-screen guide icons.

DivX REGISTRATION The System has its own Registration Code for DivX playback. You can confirm the code of your System.

•Once you play back a DivX file created by using the Registration Code, the System’s code is overwritten by a totally different new one for copyright protection purposes.

Speaker setting menu (SPK.SETTING)

SPK.SETTING menu is available only when the speaker position mode is set to “S.SPK R” ( 11).

LEVEL

Adjust the output level of each speaker while monitoring the test tone.

 

 

 

 

 

 

 

 

 

 

 

 

FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT

 

SPEAKER: Select the speaker, then adjust the output level.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEST TONE: Turns on/off the test tone.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DELAYAdjust the delay time of the speakers.

Ex.:

Center

 

 

 

Subwoofer

 

FRONT LEFT/RIGHT SPEAKER,

 

 

 

 

 

 

 

 

1 ms

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CENTER SPEAKER, SURROUND

 

Front left

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RIGHT/LEFT SPEAKER: Select the

 

0 ms

 

 

 

 

 

 

 

 

 

Front right

 

 

 

 

 

 

speaker, then adjust the distance from

 

 

 

 

 

 

 

 

 

 

 

0 ms

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the listening position to the speakers.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.0 m

 

 

• 1 ms increase (or decrease) in delay time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.7 m

 

 

 

corresponds to about 30 cm decrease (or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.4 m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

increase) in distance.

 

 

 

 

 

 

 

2.1 m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Set to 0 ms for the furthest speaker from

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

your position as the basis for the delay time

 

Surround left

 

 

 

 

 

 

 

Surround right

 

 

setting.

 

2 ms

 

 

 

 

 

 

 

2 ms

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUBWOOFER Make the subwoofer setting.LEVEL: Adjust the output level of the subwoofer.

CROSS OVER: Select an appropriate crossover frequency according to the size of the cone speaker unit built into the small speaker connected.

120Hz: Select this when the cone speaker unit size is 8 cm or more.150Hz: Select this when the cone speaker unit size is between 6 cm and 8 cm.200Hz: Select this when the cone speaker unit size is 5 cm or less.

24