JVC Tuner operations, Tuning in to a station, Presetting stations, Selecting the FM reception mode, Tuning manually, Tuning automatically, Storing stations

Tuner operations

Set the remote control mode before operation.

• Select the band (“FM” or “AM”)

you want to listen to. (10)

Tuning in to a station

Tuning manually

You can also tune in to the station by pressing cursor 5/Y.

Tuning automatically

«Hold«Hold

The System tunes in the first-found station of sufficient signal strength.

You can also tune in to the station by pressing and holding cursor 5/Y.

Presetting stations

You can preset 30 FM stations and 15 AM (MW) stations.

Storing stations

1Tune in to the station you want to preset.

2 “_ _” flashes on the display. Perform the next

step while “_ _” is flashing.

3Select a preset number, then store the station to that number.

Store

Enter a preset number*

• “STORED” appears on the display.

Tuning in to a preset station

Select a preset number.*

You can also select a preset number

by pressing PRESET UP or PRESET DOWN.

*For details on using the number buttons, see “How to use the

number buttons” ( 9).

Selecting the FM reception mode

When the stereo FM program currently tuned in is noisy, you can change the FM reception mode to improve the reception.

Normally select this.

AUTO • When a stereo station is tuned in, the ST indicator lights on the

display.

Select to improve reception. (You MONO will lose the stereo effect.)

25